Active filters

Unipos FD8030 Optical Smoke Detector
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
€13.58
Out-of-Stock
Security system kit SECOLINK GSV4B+KM20B+CAS6
Out-of-Stock
Kit includes control panel GSV4B, keypad KM20B and plastic case CAS6 with integrated transformer5 wired zones1 PGM outputs5 usersArea 116 timersAlarm notification by GSM call, SMS512 event memoryRemote system control using Android or IphoneEN50131, Grade2
NewOut-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
Keypad SECOLINK KM24G
2 wired zones1 PGM outputLCD screenGraphic display: 240 x 120 pixels24 buttonsMicro speakerUSB interface
€102.15
Out-of-Stock
UNIPOS FD7204 Sounder (indoor)
Out-of-Stock
Addressable sounder beacon device – base with built-in short-circuit isolator and accumulator battery, is used for sound and flash indication on registered events by the Interactive fire alarm panel IFS7002. The FD7204 is used for indoor applications.
Control panel SECOLINK S16eT
5/10 zonesMaximum 16 zones3PGM4 areas 16 timersIntegrated GSM modem with eSIM card and 2-year plan
€189.84
Control panel SECOLINK S32eT
5/10 zonesMaximum32 zones3PGM4 areas Integrated GSM modem with eSIM card and 2-year plan
€208.28
Keypad SECOLINK KM25M
LCD displayGraphic display: 240 x 120 pixels25 buttonsMicro speakerUSB micro- Interface B
€161.87