New
€41.88
Expansion Modules
There are 24 products.
Communication interface SATEL ACCO-USB
Out-of-Stock. Ask the seller
Type: Communication interface Model: SATEL ACCO-USB Connection: RS-485 via USB Usage: For ACCO-USB-CZ reader Dimensions: 125 x 114.5 x 31 mm Operating temperature: +5…+40 °C Power supply: 5 V (via USB port) Weight: 250 g
€90.65
The expansion module SATEL INT-R
Out-of-Stock. Ask the seller
Type: Expansion module Model: SATEL INT-R Function: Support for card readers Compatibility: iButton chips, Wiegand readers Environmental class: II Board dimensions: 140 x 68 mm Operating temperature range: -10…+55 °C Supply voltage: 12 V DC ±15% Standby mode current consumption: 110 mA Maximum current consumption: 150 mA Weight: 80 g Relay contacts rated load (resistive): 5 A / 30 V DC Maximum humidity: 93 ±3%
€75.28
Expansion module and DIN rail SATEL INT-ORS (8...
Out-of-Stock. Ask the seller
Type: Expansion module Model: SATEL INT-ORS Number of relay outputs: 8 Supply voltage: 12 V DC Operating temperature range: -10…+55 °C Standby mode current consumption: 35 mA Maximum current consumption: 310 mA Weight: 285 g Maximum humidity: 93±3% Occupied number of 17.5 mm modules: 7 Dimensions: 122 x 93 x 58 mm Environmental class according to EN50130-5: II Relay output rating (resistive load): 16 A / 230 V AC +12 V output rating: 2.5 A / 12 V DC
€117.85
Expansion module SATEL INT-O (8 outputs, select...
Out-of-Stock. Ask the seller
Type: Expansion module Model: SATEL INT-O Outputs: 8 (choice between OC / relay) Power supply voltage: 12 V DC Operating temperature range: -10 °C...+55 °C Standby mode current consumption: 30 mA Maximum current consumption: 160 mA Weight: 90 g Maximum humidity: 93±3% Current consumption by active relay: 16 mA Dimensions: 140 x 68 mm Environmental class according to EN50130-5: II OC outputs rating: 50 mA / 12 V DC Relay outputs rating (resistive load): 1 A / 30 V DC +12 V output rating: 2.5 A / 12 V DC Security grade according to EN 50131 (without power supply): Grade 3 Security grade according to EN 50131 (with APS-412 power supply): Grade 2
€48.56
Expansion module Satel INT-PP (8 zones, 4 OC ou...
Out-of-Stock. Ask the seller
Type: Expansion module Model: Satel INT-PP Number of zones: 8 Number of OC outputs: 4 Number of relay outputs: 4 Supply voltage: 12 V DC Operating temperature range: -10 °C...+55 °C Standby mode current consumption: 35 mA Maximum current consumption: 150 mA Weight: 80 g Maximum humidity: 93±3% Dimensions: 140 x 68 mm Environmental class according to EN50130-5: II OC outputs rating: 50 mA / 12 V DC Relay outputs rating (resistive load): 1 A / 30 V DC +12 V output rating: 2.5 A / 12 V DC Security grade according to EN 50131 (without power supply): Grade 3 Security grade according to EN 50131 (with APS-412 power supply): Grade 2
€80.62
€16.88
Expansion module SECOLINK EXM800
Turime sandėlyje
Up to 8 wired zonesUp to 7 PGMUp to 300m from the control panelVoltage measurement
€28.48
€29.14
€40.20
Expansion module Satel INTEGRA INT-E (8 zones)
Out-of-Stock. Ask the seller
Type: Expansion module Model: INTEGRA Satel INT-E Number of zones: 8 Compatible power supply: APS-412 Supply voltage: 12 V DC Operating temperature: -10 °C...+55 °C Standby mode current consumption: 35 mA Maximum current consumption: 80 mA Weight: 47 g Maximum humidity: 93±3% Dimensions: 80 x 57 mm Environmental class according to EN50130-5: II +12 V output rating: 2.5 A / 12 V DC Security grade acc. to EN 50131 (without power supply): Grade 3 Security grade acc. to EN 50131 (with APS-412 power supply): Grade 2
€45.33
Wireless module WLM-600-433
Out-of-Stock. Ask the seller
The module is designed for wireless security and temperature sensors, operating in 433 MHz band, radio signal receptionThe module can be used only with Alarm and Remote Control System GsmAlarm-600
€46.95
Expansion module SECOLINK EXT016
Out-of-Stock. Ask the seller
16 wireless zones1 receiver on the board120 remote controls34 macrosUp to 300m from the control panel
€46.95
€57.84
Expansion module SECOLINK EXT216
Out-of-Stock. Ask the seller
16 wireless zones2 receiver on the board120 remote controls34 macrosUp to 300m from the control panel
€58.28
Expansion module SECOLINK EXT116S
Out-of-Stock. Ask the seller
16 wireless zonesZones 1-8 NO9-16 zones NCUp to 100m from the sensorCompatibility: BK1, BK3, BK4, BT1, BP1
€63.57
€71.21
€72.37
Paradox 8-Zone Expansion Module ZX82
Turime sandėlyje
Expansion of 8 additional zonesSupports SP, MG and EVO4-wire bus connectionStatus LEDs for zones, power and bus data (ZX82)Enclosure with cover lock mechanism (ZX82)On-board Tamper (ZX82)Firmware upgradeable
€82.69
8-PGM Expansion Module Paradox PGM82
Turime sandėlyje
Expansion of 8 programmable outputsPGM control via Insite GOLD applicationPGM control with manual on-box switches (PGM82)Can follow system eventsDisplay for each PGM, Data and PowerBox cover lock mechanism (PGM82)Supports SP, MG, EVO and SwanConnects to control panel via 4-wire on keypad busFirmware upgradeable
€101.07
Internet connection module SATEL ETHM-1 Plus
Out-of-Stock. Ask the seller
Type: Internet communication module Model: SATEL ETHM-1 Plus Compatibility: Integra, Integra Plus, Versa control panels Communication protocols: TCP/IP, UDP Remote monitoring: Yes Compatibility with other modules: INT-GSM Supply voltage: 12 V DC Operating temperature: -10…+55 °C Standby mode current consumption: 70 mA Maximum current consumption: 80 mA Weight: 64 g Maximum humidity: 93±3% Dimensions: 68 x 140 mm
€124.64
Expansion module and DIN rail SATEL INT-IORS (8...
Out-of-Stock. Ask the seller
Type: Expansion module Model: SATEL INT-IORS Number of relay outputs: 8 Number of inputs (zones): 8 Power supply voltage: 12 V DC Maximum current consumption: 350 mA Standby mode current consumption: 35 mA Relay output rating (resistive load): 16 A / 230 V AC +12 V output rating: 2.5 A / 12 V DC Maximum humidity: 93±3% Environmental class according to EN50130-5: II Operating temperature range: -10…+55 °C Dimensions: 122 x 93 x 58 mm Weight: 300 g Occupied number of 17.5 mm modules: 7
€160.25
€215.01
Communication interface Satel INT-KNX-2
Out-of-Stock. Ask the seller
Type: Communication interface Model: Satel INT-KNX-2 Compatibility: Integra, Integra Plus >v1.13 control panels Communication: Two-way Power supply: 12 V DC Operating temperature: -10 °C...+55 °C Standby current consumption: 43 mA Maximum current consumption: 50 mA Weight: 32 g Maximum humidity: 93±3% Dimensions: 80 x 57 mm Environmental class according to EN50130-5: II
€267.09