GORKE

Remote control Gorke PUK 101 1-ch
Turime sandėlyje
This remote control PUK 101 cooperates with any type of receiver produced by GORKE.The range of the sets consisting of this remote control and a superreactive receiver (RSU) reaches up to 100m, whereas the same remote control with a superheterodyne receiver (OPC) can have a range of 200 metres
Remote control Gorke PUK 102 2-ch
Out-of-Stock. Ask the seller
This remote control PUK 102 cooperates with any type of receiver produced by GORKE.The range of the sets consisting of this remote control and a superreactive receiver (RSU) reaches up to 100m, whereas the same remote control with a superheterodyne receiver (OPC) can have a range of 200 metres.
Remote control Gorke PUK 152 2-ch
Out-of-Stock. Ask the seller
This remote control PUK 152 cooperates with any type of receiver produced by GORKEThe range of the sets consisting of this remote control and a superreactive receiver (RSU) reaches up to 150m, whereas the same remote control with a superheterodyne receiver (OPC) can have a range of 300 metres
Remote control Gorke PUK 104 4-ch
Turime sandėlyje
This remote control PUK 104 cooperates with any type of receiver produced by GORKEThe range of the sets consisting of this remote control and a superreactive receiver (RSU) reaches up to 100 m, whereas the same remote control with a superheterodyne receiver (IDO 500) can have a range of 200 metres
Remote control Gorke PUK 303 3-ch
Turime sandėlyje
This remote control PUK 303 cooperates with any type of receiver produced by GORKEThe range of the sets consisting of this remote control and a superreactive receiver (RSU) reaches up to 300 m, whereas the same remote control with a superheterodyne receiver (OPC) can have a range of 600 metres. A version with a belt hook is available
Receiver Gorke RSU-KO1 1-ch
Turime sandėlyje
type of receiving module: superreactionsensitivity: -100 dBmnumber of channels: 1memory capacity: 14 option 113nominal voltage supply: 12 V DCallowable voltage supply: 10-15 V DCstatic power consumption: 17 mAmaximal power consumption: 40 mArelay output: 1A/ 30 V DCS transistor output: 0,5A/ 12 V DC sabotage output: 50mA/ 12 V DCrelay's operating mode: mono or bistabletime scope for the mono mode: ~1s-4min20soperating temperature range: 0 to +40dimensions (mm): 48*68*26
Receiver Gorke RSU-K01/24V
Turime sandėlyje
1 channelFrequency: 433,92 MHzNumber of channels: 1Memory capacity: 113Voltage supply: 24V DC (20-30V DC)Operating temperature range: -10 ÷ +55 °CDimensions (mm): 90*57*23InternalAlternating code
Receiver Gorke RSU-KO2 2-ch
Turime sandėlyje
type of receiving module: superreactionsensitivity: -100 dBmnumber of channels: 2memory capacity: 14 option 113nominal voltage supply: 12 V DCallowable voltage supply: 10-15 V DCstatic power consumption: 17 mAmaximal power consumption: 40 mAcapacity: relay output: 1A/ 30 V DC, S transistor output: 0,5A/ 12 V DC, sabotage output: 50mA/ 12 V DCrelay's operating mode: mono or bistabletime scope for the mono mode: ~1s-4min20soperating temperature range: 0 to +40dimensions (mm): 48*68*26
Receiver Gorke RSU-KO4 4-ch
Turime sandėlyje
type of receiving module: superreactionsensitivity: -100 dBmnumber of channels: 4memory capacity: 40 buttonsnominal voltage supply: 12 V DCallowable voltage supply: 10-15 V DCstatic power consumption: 22 mAmaximal power consumption: 104 mAcapacity:relay output: 1A/ 30 V DCrelay's operating mode: mono, bi, temporary or 2keytime scope for the mono mode: ~1s-4min15soperating temperature range: 0 to +40 °Cdimensions (mm): 48*68*26 
Stationary sender Gorke NRP-102 1-ch
Out-of-Stock. Ask the seller
GORKE NRP-102 is a stationary sender with range up to 1000m is used to forward the alarm signal from the monitored object. It has functions test signal is sent at 1h.Designed to work with receivers such as: OPC, IDO 04/99, IDO 500 and a monitoring station VIRGO 430The hermetic housing with IP67 protection allows for installation in unfavorable conditions humidity, low temperatures.BNC antenna socket allows disconnection and elevation of the antenna over obstacles.It has two independent input (normally closed) opening of either of them results in sending one or two (depending on the position of the armature) a transmission signal with a duration of 2 seconds with an interval of 1s.
Stationary sender Gorke NRP-102W 2-ch
Out-of-Stock. Ask the seller
GORKE NRP-102W is a stationary sender with range up to 1000m is used to forward the alarm signal from the monitored object. It has functions test signal is sent at 1h.Designed to work with receivers such as: OPC, IDO 04/99, IDO 500 and a monitoring station VIRGO 430The hermetic housing with IP67 protection allows for installation in unfavorable conditions humidity, low temperatures.BNC antenna socket allows disconnection and elevation of the antenna over obstacles.It has two independent input (normally closed) opening of either of them results in sending one or two (depending on the position of the armature) a transmission signal with a duration of 2 seconds with an interval of 1s.