New
4 zone call controller NC944 (without NC930 PSU)
Turime sandėlyje
An attractively-designed four zone call controller c/w mute and reset buttons. Fully compatible with C-TEC’s entire range of 800 Series Call System components. Capable of indicating standard (constant tone) and emergency (intermittent tone) calls. Requires a separate NC930 12V 250mA PSU.Includes four zonal alarm LEDs, RESET and MUTE buttons. Two open collector outputs (Emergency and Aux Out). Up to two NC944s can be connected to one NC930 PSU to create a mini-call system of up to 8 zones. Mounts on a standard 25mm UK double gang back box.
XP95 Universal address card
Out-of-Stock. Ask the seller
Universal address cards, known as XPERT cards are supplied as standard. The XPERT card holds the device address data and is installed in the mounting base. As the address data is stored in the mounting base, this means that the address remains the same, even if the device is replaced for maintenance.
UNIPOS FD7120 heat detector base
Out-of-Stock. Ask the seller
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
Apollo Series S65 Base
Turime sandėlyje
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
Orbis LX Base
Turime sandėlyje
LX Base has two slots for fixing screws at a spacing of 51mm and 69mmOne way fitDetector locking mechanism
Round Indicator RI31
Turime sandėlyje
Power supply: 5~30VDCAlarm state current at 24V DC: 40mAConnection to fire detector: two-wire lineColor of the light: redProtection: IP 40