Active filters

Unipos FD8030 Optical Smoke Detector
Unipos FD8030 Optical Smoke Detector
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
€13.58
Combined smoke + heat conventional detector UNIPOS FD8060
NewOut-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€51.01
Details View details  
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.42
Details View details  
ROGER MCT82M-BK
ROGER MCT82M-BK
MCT82M-BK - MIFARE 13.56 MHz Classic/Ultralight readerWithout keypad
€114.90
ROGER RFT1000
ROGER RFT1000
ROGER RFT1000 fingerprint reader
€554.36
UNIPOS FD7120 heat detector base
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
€2.94
Details View details  
ROGER EMKF-1 key fob
ROGER EMKF-1 key fob
EMKF-1 - EM 125 KHz key fob, reading range may be reduced by approx 50% when using the fob versus the card
€2.08
Electronic module expander ROGER XM-2DR-BRD
Out-of-Stock
Electronic module expander ROGER XM-2DR-BRD
Out-of-Stock
Electronic module of XM-2DR I/O expander without plastic enclosureTwo NO/NC inputsRelay output with single NO/NC contact and 1.5A/30VDC max loadRelay output with single NO/NC contact and 5A/230VAC max loadVersion without enclosureCommunication by means of RACS Clock&Data protocol or standalone operation
€82.38
Details View details  
ROGER PR622-G
ROGER PR622-G
Outdoor access controllerBuilt-in EM 125 kHz proximity readerScrew terminalsOptionally can be installed on Ø 60mm flush boxDark grey enclosure
€174.55
UNIPOS FD7150 Manual Call Point
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
€23.69
Details View details  
ROGER CPR32-NET-BRD
ROGER CPR32-NET-BRD
CPR32-NET-BRD network controller expands functionality of RACS 4 system and due to the built-in Ethernet interface allows for management of the access control system through LAN or WAN network.The most important features provided by CPR32-NET-BRD are: centralized event buffer, centralized clock and calendar, global anti-passback and connection of controllers in concurrently armed and disarmed alarm zones.Additionally, CPR32-NET-BRD offers software integration with Integra series intruder alarm panels (SATEL) and management of 16 wireless Sallis door locks (SALTO).
€441.26
Plastic enclosure ROGER PR402DR
Plastic enclosure ROGER PR402DR
PR402DR - controller in DIN 35mm rail plastic enclosureThe access controller for single doorMounted inside plastic enclosure dedicated to installation on 35mm DIN railOperating with AC supply, equipped with built in 1.5 A buffered power supplyEequires connection of external proximity readers
€178.74
ROGER MC16-4
ROGER MC16-4
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.
€710.96
ROGER MCX8-BRD
ROGER MCX8-BRD
MCX8 is I/O expander dedicated to RACS 5 system. Expander offer eight parametric inputs and eight relay outputs. Each input can be individually parameterized in regard of reaction time as well as applied contacts and resistors.
€224.47
Roger PR312EM-BK-G
Roger PR312EM-BK-G
Dark grey enclosureBuilt-in EM 125 kHz proximity readerWithout keypad.
€174.55
ROGER MC16-2
Out-of-Stock
ROGER MC16-2
Out-of-Stock
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.
€450.04
Details View details  
Electronic module ROGER PR402DR-12V-BRD
Electronic module ROGER PR402DR-12V-BRD
Electronic module of PR402DR-12VDC access controllerThe access controller for single doorMounted inside plastic enclosure dedicated to installation on 35mm DIN railOperating with AC supply, equipped with built in 1.5 A buffered power supplyEequires connection of external proximity readers
€150.81
ROGER MCT12E-IO
ROGER MCT12E-IO
EM 125 kHz access terminal with keypadOn-board I/Os
€98.11