Active filters

ROGER MCT82M-BK
MCT82M-BK - MIFARE 13.56 MHz Classic/Ultralight readerWithout keypad
€114.90
ROGER RFT1000
ROGER RFT1000 fingerprint reader
€554.36
ROGER EMKF-1 key fob
EMKF-1 - EM 125 KHz key fob, reading range may be reduced by approx 50% when using the fob versus the card
€2.08
Out-of-Stock
Electronic module expander ROGER XM-2DR-BRD
Out-of-Stock
Electronic module of XM-2DR I/O expander without plastic enclosureTwo NO/NC inputsRelay output with single NO/NC contact and 1.5A/30VDC max loadRelay output with single NO/NC contact and 5A/230VAC max loadVersion without enclosureCommunication by means of RACS Clock&Data protocol or standalone operation
ROGER PR622-G
Outdoor access controllerBuilt-in EM 125 kHz proximity readerScrew terminalsOptionally can be installed on Ø 60mm flush boxDark grey enclosure
€174.55
ROGER CPR32-NET-BRD
CPR32-NET-BRD network controller expands functionality of RACS 4 system and due to the built-in Ethernet interface allows for management of the access control system through LAN or WAN network.The most important features provided by CPR32-NET-BRD are: centralized event buffer, centralized clock and calendar, global anti-passback and connection of controllers in concurrently armed and disarmed alarm zones.Additionally, CPR32-NET-BRD offers software integration with Integra series intruder alarm panels (SATEL) and management of 16 wireless Sallis door locks (SALTO).
€441.26
Plastic enclosure ROGER PR402DR
PR402DR - controller in DIN 35mm rail plastic enclosureThe access controller for single doorMounted inside plastic enclosure dedicated to installation on 35mm DIN railOperating with AC supply, equipped with built in 1.5 A buffered power supplyEequires connection of external proximity readers
€178.74
ROGER MC16-4
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.
€710.96
ROGER MCX8-BRD
MCX8 is I/O expander dedicated to RACS 5 system. Expander offer eight parametric inputs and eight relay outputs. Each input can be individually parameterized in regard of reaction time as well as applied contacts and resistors.
€224.47
Roger PR312EM-BK-G
Dark grey enclosureBuilt-in EM 125 kHz proximity readerWithout keypad.
€174.55
Out-of-Stock
ROGER MC16-2
Out-of-Stock
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.
Electronic module ROGER PR402DR-12V-BRD
Electronic module of PR402DR-12VDC access controllerThe access controller for single doorMounted inside plastic enclosure dedicated to installation on 35mm DIN railOperating with AC supply, equipped with built in 1.5 A buffered power supplyEequires connection of external proximity readers
€150.81
ROGER MCT12E-IO
EM 125 kHz access terminal with keypadOn-board I/Os
€98.11
ROGER MCT12E
EM 125 kHz access terminal with keypad
€78.48
Electronic module ROGER PR402DR-BRD
PR402DR-BRD - electronic module of controller without enclosureThe access controller for single doorMounted inside plastic enclosure dedicated to installation on 35mm DIN railOperating with AC supply, equipped with built in 1.5 A buffered power supplyEequires connection of external proximity readers
€167.57
ROGER PR621-G
Outdoor access controllerBuilt-in EM 125 kHz proximity readerBolted contactsMountable directly in a 60 mm gang boxDark grey case
€146.63
ROGER CPR32-SE
CPR32-SE Network Controller is an optional Roger Access Control System (RACS) component.Using CPR32-SE in the system expands its functionality with specific features.When used with PRxx1 series controllers CPR32-SE allows for logging events and defining time-based access rights.In case of PRxx2 series controllers, CPR32-SE provides a global anti-passback feature and grouping controllers into so called Alarm Zones.
€213.65
Out-of-Stock
ROGER PR611-G
Out-of-Stock
Outdoor access controllerBuilt-in EM 125 kHz proximity readerBolted contactsSilicone keypad with backlightMountable directly in a 60 mmgang boxDark grey case