Out-of-Stock
€17.65
Home
Subcategories
There are 181 products.
Unipos FD8030 Optical Smoke Detector
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
€13.58
Out-of-Stock
€3.99
Out-of-Stock
Security system kit SECOLINK GSV4B+KM20B+CAS6
Out-of-Stock
Kit includes control panel GSV4B, keypad KM20B and plastic case CAS6 with integrated transformer5 wired zones1 PGM outputs5 usersArea 116 timersAlarm notification by GSM call, SMS512 event memoryRemote system control using Android or IphoneEN50131, Grade2
€184.77
NewOut-of-Stock
Programmable heat-sensitive cable Signaline HD+ -S
Out-of-Stock
Type: Heat-sensitive cable Model: SIGNALINE HD+ -S
€7.36
NewOut-of-Stock
Programmable heat-sensitive cable Signaline HD+ -S (stainless steel sheath)
Out-of-Stock
Type: Programmable heat-sensitive cable Model: SIGNALINE HD+ -S Sheath: Stainless steel
€9.40
NewOut-of-Stock
Signaline HD+ controller for programmable heat-sensitive cable
Out-of-Stock
Type: Controller for programmable heat-sensitive cable Model: Signaline HD+ Controller Certifications: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -20°C to +50°C Operating voltage: 20Vdc - 30Vdc (VdS EN54), 23Vdc - 30Vdc (UL) Current consumption (without LCD backlight): 31mA @ 20Vdc to 20mA @ 30Vdc Current consumption (without LCD and alarm): 61mA @ 20Vdc to 39mA @ 30Vdc Current consumption (with LCD and alarm): 85mA @ 20Vdc to 59mA @ 30Vdc Alarm output: Alarm & Pre-alarm FORM C, 2A @ 30Vdc (resistive, 60W), 0.25A @ 250Vac (62.5VA) Fault output: Normally closed opto-isolated phototransistor (Max V: 35Vdc, Max I: 80mA, Max P: 150mW) Modbus output: 2-wire RS-485 Modbus RTU or ASCII IP and impact rating: IP65 (IK08) Weight: 860 g
€1,106.98
NewOut-of-Stock
Signaline HD+ EOL controller for programmable heat-sensitive cable
Out-of-Stock
Type: End-of-line controller Model: Signaline HD+ End of Line Application: For programmable heat-sensitive cable Alarm class: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -40°C to +125°C Mounting: External fixing bracket (included) Enclosure material: Aluminium IP and impact rating: IP65 Weight: 115 g
€138.98
NewOut-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€51.01
SIGNALINE end of line FT-EOL-EN
Alarm temperature: 78°C, 88°CIP rating: IP66
€204.39
Out-of-Stock
Signaline HD
Out-of-Stock
Automatically resets when coolUnaffected by steam, dust, humidity and smokeSimple installation
€5.53
Out-of-Stock
GSM control panel SECOLINK GSV4
Out-of-Stock
6 zone control panel3 PGM5 usersArea 1512 event memoryAlarm notification by GSM call, SMSVoice guideGrade2
€114.59
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.42
Signaline FT-185-R
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated
€11.83
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
€2.94
UNIPOS FD7120 heat detector
Addressable rate of rise heat detector
€16.34
Pyronix KX10DP
10m pet immune detection up to 24kg animalSelectable EOL (End Of Line) resistorsBlue Wave TechnologyAuto sensitivity featureDigital temperature compensation
€12.56
PIR Detector Pyronix Octopus EP
Four elements sensor360°Maximum range 12m-30°C to +70°C
€29.89
PIR Detector Pyronix KX15DTAM
Dual technologyAuto sensitivity featureSelectable EOL (End Of Line) resistorsBlue Wave TechnologyLED indication
€44.76
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
€23.69
Pyronix KX18DC
18m digital curtain detection coverageDual element pyro-electric sensorSelectable EOL (End Of Line) resistorsBlue wave technologyAuto sensitivity featureDigital temperature compensationTamper proof brackets includedSealed opticsABS plasticsComplies with EN50131-1
€21.77
Out-of-Stock
Keypad SECOLINK KM24A
Out-of-Stock
2 wired zones1 PGM outputLCD screenGraphic display: 128 x 64 pixels24 buttonsMicro speakerUSB interface
€92.71
Out-of-Stock
Expansion module SECOLINK EXT016
Out-of-Stock
16 wireless zones1 receiver on the board120 remote controls34 macrosUp to 300m from the control panel
€47.42
Out-of-Stock
Expansion module SECOLINK EXT216
Out-of-Stock
16 wireless zones2 receiver on the board120 remote controls34 macrosUp to 300m from the control panel
€58.87
Out-of-Stock
Expansion module SECOLINK EXT116S
Out-of-Stock
16 wireless zonesZones 1-8 NO9-16 zones NCUp to 100m from the sensorCompatibility: BK1, BK3, BK4, BT1, BP1
€64.21
Out-of-Stock
Ruijie Reyee RG-ANT13-360 Antenna
Out-of-Stock
Type: Antenna Brand: Ruijie & Reyee Model: RG-ANT13-360 Operating Frequency: 5 GHz Technology: Dual-stream 2x2 Gain: 13 dBi Horizontal Beamwidth: 360° Vertical Beamwidth: 7° Usage: Recommended for PTMP Maximum Distance: 2 km
€199.99
Antenna Ruijie RG-ANT16S-120 (120 )
Antenna Ruijie & Reyee RG-ANT16S-120 Frequency: 5GHzIP rating: IP55 Technology: 2x2 two-space stream technology Gain: 16dBi Horizontal position: 120° Vertical position: 10° Recommended PTMP distance: up to 5KM
€94.99
Antenna Ruijie RG-ANT20S-90 (90 )
Ruijie RG-ANT20S-90 90 degree antenna Distance: 10 km Gain: 20 dBi IP class: IP55
€139.98