Active filters

WAGO 2273-202
Turime sandėlyje
COMPACT PUSH WIRE® connector for junction boxes2-conductor terminal blockTransparent housingWhite cover
WAGO 2273-203
Turime sandėlyje
COMPACT PUSH WIRE® connector for junction boxes3-conductor terminal blockTransparent housingOrange cover
WAGO 2273-204
Turime sandėlyje
COMPACT PUSH WIRE® connector for junction boxes4-conductor terminal blockTransparent housingRed cover 
WAGO 2273-205
Turime sandėlyje
COMPACT PUSH WIRE® connector for junction boxes5-conductor terminal blockTransparent housingYellow cover
WAGO 221-412
Turime sandėlyje
COMPACT Splicing Connectors2-conductor connectorWith operating leversMax.ambient operating temp. 85 °C 
WAGO 221-413
Turime sandėlyje
COMPACT Splicing Connectors3-conductor connectorWith operating leversMax. ambient operating temp. 85 °C 
WAGO 221-415
Turime sandėlyje
COMPACT Splicing Connectors5-conductor connectorWith operating leversMax. ambient operating temp. 85 °C
WAGO 221-612
Turime sandėlyje
COMPACT Splicing Connectors2-conductor connectorWith operating leversMax.ambient operating temp. 85 °C 2x0.5-6mm41A
WAGO 221-613
Turime sandėlyje
COMPACT Splicing Connectors2-conductor connectorWith operating leversMax.ambient operating temp. 85 °C 3x0.5-6mm41A
WAGO 221-615
Turime sandėlyje
COMPACT Splicing Connectors5-conductor connectorWith operating leversMax.ambient operating temp. 85 °C 5x0.5-6mm41A
UNIPOS FD7120 heat detector base
Out-of-Stock. Ask the seller
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
Unipos FD8030 Optical Smoke Detector
Out-of-Stock. Ask the seller
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
UNIPOS FD7150 Manual Call Point
Out-of-Stock. Ask the seller
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock. Ask the seller
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
UNIPOS FD7204 Sounder (indoor)
Out-of-Stock. Ask the seller
Addressable sounder beacon device – base with built-in short-circuit isolator and accumulator battery, is used for sound and flash indication on registered events by the Interactive fire alarm panel IFS7002. The FD7204 is used for indoor applications.
Set Wago 887-362 (221-2411 + 2773-2401 + 221-41...
Out-of-Stock. Ask the seller
In the set:1 box 221-2411 (60 pcs., 0.2 - 4mm 32A)1 box 2773-2401 (100 pcs., 2 x 0.75-4mm 32A)3 box 221-413 (150 pcs., 0.2 - 4mm 32A)3 boxes 2273-203 (300 pcs ., 3 x 0.5-2.5mm 32A)3 boxes 2273-205 (300 pcs. 5 x 0.5-2.5mm 32A)Tool for removing wire insulation 0.03 mm² - 16 mm² 206-1125