Active filters

Unipos FD8030 Optical Smoke Detector
Unipos FD8030 Optical Smoke Detector
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
€13.58
Combined smoke + heat conventional detector UNIPOS FD8060
NewOut-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€51.01
Details View details  
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.42
Details View details  
UNIPOS FD7120 heat detector base
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
€2.94
Details View details  
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
€63.77
Details View details  
UNIPOS FD7150 Manual Call Point
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
€23.69
Details View details  
Orbis Marine TimeSaver Base
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
€7.27
Details View details  
Orbis Heat Detectors
Orbis Heat Detectors
The Orbis Heat Detector monitors the temperatureRed flashing LED at StartUp confirms that the device is operatingSensAlert, yellow flashing LED, indicates faulty operation
€15.78
Orbis LX Base
Orbis LX Base
LX Base has two slots for fixing screws at a spacing of 51mm and 69mmOne way fitDetector locking mechanism
€3.11
Orbis Optical Smoke Detector
Orbis Optical Smoke Detector
Optical Smoke Detector operates on the well established light scatter principle. The sensing technology used to radically different from the previous optical detectors and significantly reduces false alarms
€16.84
Orbis Heat Detector
Orbis Heat Detector
Heat Detector monitors the temperature by using a single thermistor which provides a coltage output proportional to the external air temperature
€16.67
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring
€66.26
Apollo Series S65 thermal detector (55000-122APO)
Apollo Series S65 thermal detector (55000-122APO)
The Series S65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperatureWide-operating voltage of 9–33 V DC
€13.00
Apollo Series S65 Base
Apollo Series S65 Base
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
€2.61
ORBIS IS Optical smoke detector
ORBIS IS Optical smoke detector
The sensing technology in the Orbis IS optical smoke detector is significantly different in design from previous optical detectors
€171.69
ORBIS IS heat detector
ORBIS IS heat detector
The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2000 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.
€150.51
Orbis TimeSaver Relay Base
Out-of-Stock
Orbis TimeSaver Relay Base
Out-of-Stock
The TimeSaver Relay Base incorporates a single-pole, voltage-free, changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is resetGrouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A
€28.53
Details View details  
Adresable Call Point Teletek SensoIRIS MCP150
Adresable Call Point Teletek SensoIRIS MCP150
Type of the working element – Resettable (flexible)Type ABuilt-in isolatorOptional protective plastic coverRate of protection IP40EN54-11 and EN54-17 certified
€29.69