Out-of-Stock
€17.65
Home
Subcategories
There are 71 products.
Out-of-Stock
Security system kit SECOLINK GSV4B+KM20B+CAS6
Out-of-Stock
Kit includes control panel GSV4B, keypad KM20B and plastic case CAS6 with integrated transformer5 wired zones1 PGM outputs5 usersArea 116 timersAlarm notification by GSM call, SMS512 event memoryRemote system control using Android or IphoneEN50131, Grade2
€184.77
Apollo Series S65 Conventional heat detector with LED indicator (55000-121APO)
ConventionalWith flashing LED
€13.00
Out-of-Stock
GSM control panel SECOLINK GSV4
Out-of-Stock
6 zone control panel3 PGM5 usersArea 1512 event memoryAlarm notification by GSM call, SMSVoice guideGrade2
€114.59
Out-of-Stock
Apollo XP95 Protocol Translator - 55000-855APO
Out-of-Stock
Protocol Translators are installed in the safe area ensuring integrity of communication between control equipment and field devices and safety within the limits of BASEEFA approvals
€129.18
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
€63.77
Out-of-Stock
Keypad SECOLINK KM24A
Out-of-Stock
2 wired zones1 PGM outputLCD screenGraphic display: 128 x 64 pixels24 buttonsMicro speakerUSB interface
€92.71
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
€7.27
Out-of-Stock
Expansion module SECOLINK EXT016
Out-of-Stock
16 wireless zones1 receiver on the board120 remote controls34 macrosUp to 300m from the control panel
€47.42
Orbis Heat Detectors
The Orbis Heat Detector monitors the temperatureRed flashing LED at StartUp confirms that the device is operatingSensAlert, yellow flashing LED, indicates faulty operation
€15.78
Out-of-Stock
Expansion module SECOLINK EXT216
Out-of-Stock
16 wireless zones2 receiver on the board120 remote controls34 macrosUp to 300m from the control panel
€58.87
Out-of-Stock
Expansion module SECOLINK EXT116S
Out-of-Stock
16 wireless zonesZones 1-8 NO9-16 zones NCUp to 100m from the sensorCompatibility: BK1, BK3, BK4, BT1, BP1
€64.21
Orbis LX Base
LX Base has two slots for fixing screws at a spacing of 51mm and 69mmOne way fitDetector locking mechanism
€3.11
Orbis Optical Smoke Detector
Optical Smoke Detector operates on the well established light scatter principle. The sensing technology used to radically different from the previous optical detectors and significantly reduces false alarms
€16.84
Orbis Heat Detector
Heat Detector monitors the temperature by using a single thermistor which provides a coltage output proportional to the external air temperature
€16.67
Out-of-Stock
Orbis Multisensor Smoke Detector
Out-of-Stock
The Orbis Multisensor Detector benefits from the same false alarm reduction technology as the optical detector, enhanced by the addition of a thermal sensing element
€24.85
Out-of-Stock
Apollo XP95 Manual Call Point Tranparent Hinged Cover 26729-152
Out-of-Stock
The Transparent Hinged Cover is for use with XP95 and Discovery Manual Call PointsCan be fitted to add further protection against accidental operation
€8.18
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring
€66.26
Apollo Series S65 thermal detector (55000-122APO)
The Series S65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperatureWide-operating voltage of 9–33 V DC
€13.00
Apollo Series S65 Base
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
€2.61
ORBIS IS Optical smoke detector
The sensing technology in the Orbis IS optical smoke detector is significantly different in design from previous optical detectors
€171.69
ORBIS IS heat detector
The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2000 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.
€150.51
Out-of-Stock
€22.16
Out-of-Stock
Keypad SECOLINK KM20B
Out-of-Stock
2 wired zonesLCD screen2 lines of 16 characters each20 buttonsBuzzerUSB interface
€52.57
Apollo Series S65 Conventional smoke detector (55000-317APO)
ConventionalWith flashing LEDTemperature: -20 + 60°
€14.30
Control panel and keypad set SECOLINK P32+KM24G
7/14 wired areasConnection of two-wire smoke detectors32 wireless zones3 PGM outputs31 users4 areasUp to 15 keyboards512 event memoryContact IDEN50131, Grade2
€147.08
Control panel and keypad set SECOLINK PA808+KM24A
6 Inbuilt wired zones on board3 PGM on board4 system timersUp to 4 phone numbers to reportEN 50131, Grd2, ROHS
€99.39
Out-of-Stock
Orbis TimeSaver Relay Base
Out-of-Stock
The TimeSaver Relay Base incorporates a single-pole, voltage-free, changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is resetGrouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A
€28.53