Home
Subcategories
There are 55 products.
Unipos FD8030 Optical Smoke Detector
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
€13.58
Out-of-Stock
€112.99
Out-of-Stock
ELDES ESIM320 4G remote gate controller
Out-of-Stock
Frequency: 4GCalls, SMS, Smart gate appUp to 2000 usersInputs: 3Outputs: 2
€157.59
Out-of-Stock
€3.99
NewOut-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€51.01
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.42
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
€2.94
UNIPOS FD7120 heat detector
Addressable rate of rise heat detector
€16.34
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
€23.69
ELDES ESIM420 4G remote gate controller
Type: Gate and barrier controller Model: ESIM420 Number of users: Up to 2000 Connectivity: 4G Control: Calls, SMS, mobile application Application: Smart Gate Brand: ELDES
€124.27
Antenna with magnetic pad ELDES (more efficient operation, 3m)
Frequency: 824~960/1710~2170MHzPolarization: linearStrength: 5.0dBiCable: RG174 Connector: SMA maleFixing: magneticOperating temperature: -40C~+85C
€13.58
ELDES ESIM384
Hybrid alarm control panel with GSM/GPRS communicatorESIM384 is hybrid powerful and very flexible smart home alarm system for private houses, cottages, village houses, garages, warehouses and other buildings.System also capable using schedulers of turning on/off the electrical appliances by SMS text message and alarm system keypads/touchpad (or free ELDES Utility tool). This alarm system provides a simple thus effective way of use.
€201.94
Out-of-Stock
€5.71
Temperature detector Unipos FD8020 (with LED contacts, with base)
Manufacturer: UniposWith LED contactsWith base10-30V DC
€12.92
Out-of-Stock
UNIPOS FD7204 Sounder (indoor)
Out-of-Stock
Addressable sounder beacon device – base with built-in short-circuit isolator and accumulator battery, is used for sound and flash indication on registered events by the Interactive fire alarm panel IFS7002. The FD7204 is used for indoor applications.
€40.55
ELDES Wireless signal repeater EWR2
Wireless device EWR2 expands the wireless signal range between Eldes alarm systems ESIM364, EPIR3 and wireless devices. EWR2 comes with LED indicator intended for successful data transmission to the alarm system confirmation A set of EWR2 includes two antennas, internal and external that switch automaticallyRepeater is also equipped with the battery fault/wrong placement LED indication and external power connection LEDIt is easy to bind EWR2 by using Eldes Configuration Tool or by sending SMS message to alarm systemUp to 4 EWR2 devices can be connected to Eldes alarm systemsWireless repeater EWR2 supports up to 32 wireleless accessories, such as sirens, smoke detectors, door sensors and other
€93.21
ELDES Programmable output module EPGM8
Module EPGM8 is used to expand the quantity of outputs in Alarm and Control system ESIM384 to 12 programmable outputs (8 more programmable outputs)
€31.64
ELDES Hardwired zone and PGM expansion module EPGM1
The 16 Zone Expansion Module EPGM1 adds 16 hardwired zones2 Programmable outputs 500mA (PGM) and provides 500mA @ 12VDC auxiliary current
€63.53
Dallas reader ESIM264/364 ELDES
Simple, low-cost metal stampings form a read/write probe for the iButton familyProbe guides the entry of the iButtoniButton slides over the surface to self-clean contactsAccessible shallow probe cavity simplifies removal of debris such as mudFlexible design supports panel-mount or hand-grip mount with optional tactile feedbackBright tarnish-resistant metal surface provides millions of operationsPanel-mount probe, prewired for easy installationHand-grip probe mates to RJ-11 jack for quick installation
€14.56
Out-of-Stock
ELDES Wireless LED keypad EWKB4
Out-of-Stock
Wake-up on front cover openingSystem configurationBuilt-in temperature sensorVisual indication by LED indicatorsAudible indication by built-in buzzerBack-lightVisual indication by LED indicatorsAudible indication by built-in buzzer
€75.21
USB cable ELDES (1.8m cable)
For Eldes ESIM384, Esim320, Pitbull Alarm ProUSB 5 pin
€2.46