Active filters

Unipos FD8030 Optical Smoke Detector
Unipos FD8030 Optical Smoke Detector
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
€13.58
Combined smoke + heat conventional detector UNIPOS FD8060
NewOut-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€51.01
Details View details  
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.42
Details View details  
UNIPOS FD7120 heat detector base
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
€2.94
Details View details  
UNIPOS FD7150 Manual Call Point
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
€23.69
Details View details  
Battery CSB (5Ah, 12V, F2, VRLA, AGM)
Battery CSB (5Ah, 12V, F2, VRLA, AGM)
Type: Battery (AGM) Model: CSB 5Ah 12V F2 VRLA Capacity: 5Ah Voltage: 12V Technology: VRLA (Valve-Regulated Lead-Acid) Connection type: F2
€29.10
UNIPOS FD7204 Sounder (indoor)
Out-of-Stock
UNIPOS FD7204 Sounder (indoor)
Out-of-Stock
Addressable sounder beacon device – base with built-in short-circuit isolator and accumulator battery, is used for sound and flash indication on registered events by the Interactive fire alarm panel IFS7002. The FD7204 is used for indoor applications.
€40.55
Details View details  
16-port switch CISCO CBS110-16T-EU
Out-of-Stock
16-port switch CISCO CBS110-16T-EU
Out-of-Stock
16 port switches18 ports 100/1000mbpsCISCO CBS110-16T-EU modelNumber of MAC addresses: 8KBandwidth: 32 MbpsSwitching performance: 23.38 MppsMAC address table: 8KQoS: WRR, loop prevention, HOL blocking prevention Mounting: rackOperating temperature: 0-40°C
€206.03
Details View details  
28 port switch CISCO CBS220-24T-4GEU
28 port switch CISCO CBS220-24T-4GEU
28 port switch 24 ports 100/1000 Mbps 4 ports XSFP Giga USB 2.0 Level 2 (L2) and Level 3 (L3) switching capabilities Bandwidth: 56 Mbps Switching performance: 41.66 Mpps QoS functions: WRR (Weighted Round Robin), loop prevention, HOL (Start of Queue Blocking) prevention SNMP support for network management ARP support SSH support for secure management Loop prevention and VLAN support ICMP support Mounting: Rack Operating temperature: -5 to 50°C
€367.90
28 port switch CISCO CBS250-24T-4GEU
28 port switch CISCO CBS250-24T-4GEU
28 port switch 24 ports 100/1000 Mbps 4 ports XSFP Giga USB 2.0 Level 2 (L2) and Level 3 (L3) switching capabilities Bandwidth: 56 Mbps Switching performance: 41.7 Mps QoS functions: WRR (Weighted Round Robin), loop prevention, HOL (Start of Queue Blocking) preventionNumber of MAC addresses - 8K. SNMP support for network management ARP support SSH support for secure management Loop prevention and VLAN support ICMP support Mounting: Rack Operating temperature: from -5 to 50°C
€438.13
24-port switch CISCO CBS110-24T-EU
24-port switch CISCO CBS110-24T-EU
Ports: 24 ports 100/1000 Mbps Connecting capacity: 48 Gbps Packet processing speed: 35.7 Mpps MAC address table size: 8K QoS (Quality of Service): Supports QoS functions WRR (Weighted Round Robin): Supports WRR queue allocation Loop: Loop detection function HOL (Head-of-Line Blocking): Blocking Prevention Mechanisms Installation: Fits the law Operating temperature: 0-40 °C
€322.13
24-port switch CISCO IE-4010-4S24P
Out-of-Stock
24-port switch CISCO IE-4010-4S24P
Out-of-Stock
Type: Switch Model: CISCO IE-4010-4S24P Number of ports: 24 (PoE+ LAN Giga) SFP ports: 4x SFP+ (1G) Throughput: 56 Gbps Forwarding rate: 41.67 Mpps Management: L2/L3 I/O features: IGMP, MRP, PRP Security: SSH/SSL Quality of Service: QoS Standards: EN61000 Maximum power: 385W Power supplies: x2 IE4010/5000 Operating temperature: -40°C to +70°C
€10,588.94
Details View details