Active filters

Power supply unit INIM IPS24160G
Out-of-Stock
Power supply unit INIM IPS24160G
Out-of-Stock
Inim IPS24160G Switching power supply - battery charger. 230 V AC / 27,6 V DC; max. 160 W: 4 A load and 1,2 A to charge in same time.Protected against overload, short circuit and reverse polarity.
€106.29
Details View details  
Unipos FD8030 Optical Smoke Detector
Unipos FD8030 Optical Smoke Detector
Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7
€13.58
INIM SmartLoop/2080-G
Out-of-Stock
INIM SmartLoop/2080-G
Out-of-Stock
2 loops expandable to 8 (for 2080 expandable models)all models in the SmartLoop series are EN54 Approvedmultiprocessor hardware structure32 bit main CPUOpenLoop TechnologyHorNet token- ring architecturemanages up to 30 panel token-ring network via the SmartLoop/NET board (accessory item)easy remote access through SmartLAN board (accessory item)2 or 4 wire loop connectionsupports 240 devices per loopmanages up to 8 remote-control Repeater panels connected to the RS485 Interface3 general purpose NAC outputs1 NAC Alarm output1 NAC Trouble output1 dry contact Alarm relay1 dry contact Trouble relay
€1,226.35
Details View details  
Combined smoke + heat conventional detector UNIPOS FD8060
NewOut-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€51.01
Details View details  
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.42
Details View details  
UNIPOS FD7120 heat detector base
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
€2.94
Details View details  
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
€63.77
Details View details  
UNIPOS FD7150 Manual Call Point
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
€23.69
Details View details  
Orbis Marine TimeSaver Base
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
€7.27
Details View details  
Orbis Heat Detectors
Orbis Heat Detectors
The Orbis Heat Detector monitors the temperatureRed flashing LED at StartUp confirms that the device is operatingSensAlert, yellow flashing LED, indicates faulty operation
€15.78
Smoke detector X-Sense XS01 (Autonomous)
New
Smoke detector X-Sense XS01 (Autonomous)
Type: Autonomous smoke detector Model: X-Sense XS01 Alarm sound level: 85 dB Battery: Integrated lithium, non-replaceable Battery life: 10 years
€16.19
X-Sense XC04-WX Wi-Fi Carbon monoxide alarm
New
X-Sense XC04-WX Wi-Fi Carbon monoxide alarm
Type: Standalone CO (carbon monoxide) detector Model: X-Sense XC04-WX Connectivity: Wi-Fi Display: LCD Sound alarm: 85 dB Power supply: CR123A battery (included)
€44.15
Orbis LX Base
Orbis LX Base
LX Base has two slots for fixing screws at a spacing of 51mm and 69mmOne way fitDetector locking mechanism
€3.11
Orbis Optical Smoke Detector
Orbis Optical Smoke Detector
Optical Smoke Detector operates on the well established light scatter principle. The sensing technology used to radically different from the previous optical detectors and significantly reduces false alarms
€16.84
Orbis Heat Detector
Orbis Heat Detector
Heat Detector monitors the temperature by using a single thermistor which provides a coltage output proportional to the external air temperature
€16.67