Active filters

Security system kit SECOLINK GSV4B+KM20B+CAS6
Out-of-Stock
Security system kit SECOLINK GSV4B+KM20B+CAS6
Out-of-Stock
Kit includes control panel GSV4B, keypad KM20B and plastic case CAS6 with integrated transformer5 wired zones1 PGM outputs5 usersArea 116 timersAlarm notification by GSM call, SMS512 event memoryRemote system control using Android or IphoneEN50131, Grade2
€184.77
Details View details  
Signaline HD+ controller for programmable heat-sensitive cable
Out-of-Stock
Signaline HD+ controller for programmable heat-sensitive cable
Out-of-Stock
Type: Controller for programmable heat-sensitive cable Model: Signaline HD+ Controller Certifications: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -20°C to +50°C Operating voltage: 20Vdc - 30Vdc (VdS EN54), 23Vdc - 30Vdc (UL) Current consumption (without LCD backlight): 31mA @ 20Vdc to 20mA @ 30Vdc Current consumption (without LCD and alarm): 61mA @ 20Vdc to 39mA @ 30Vdc Current consumption (with LCD and alarm): 85mA @ 20Vdc to 59mA @ 30Vdc Alarm output: Alarm & Pre-alarm FORM C, 2A @ 30Vdc (resistive, 60W), 0.25A @ 250Vac (62.5VA) Fault output: Normally closed opto-isolated phototransistor (Max V: 35Vdc, Max I: 80mA, Max P: 150mW) Modbus output: 2-wire RS-485 Modbus RTU or ASCII IP and impact rating: IP65 (IK08) Weight: 860 g
€1,106.98
Details View details  
Signaline HD+ EOL controller for programmable heat-sensitive cable
Out-of-Stock
Signaline HD+ EOL controller for programmable heat-sensitive cable
Out-of-Stock
Type: End-of-line controller Model: Signaline HD+ End of Line Application: For programmable heat-sensitive cable Alarm class: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -40°C to +125°C Mounting: External fixing bracket (included) Enclosure material: Aluminium IP and impact rating: IP65 Weight: 115 g
€138.98
Details View details  
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€51.01
Details View details  
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.42
Details View details  
UNIPOS FD7120 heat detector base
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
€2.94
Details View details  
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
€63.77
Details View details  
UNIPOS FD7150 Manual Call Point
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
€23.69
Details View details  
Orbis Marine TimeSaver Base
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
€7.27
Details View details  
Signaline FT-68
Out-of-Stock
Signaline FT-68
Out-of-Stock
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated
€5.31
Details View details  
Signaline FT-88
Out-of-Stock
Signaline FT-88
Out-of-Stock
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated
€5.31
Details View details  
Signaline FT-68R
Out-of-Stock
Signaline FT-68R
Out-of-Stock
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated.
€6.84
Details View details