Addressable systems

INIM Smart Line conventional central key Reliable and safe

Sticker for INIM SmartLine panel

The Intelligent Input/Output Unit provides supervision of one or more normally open contacts connected to a single pair of cables and a set of changeover relay output contacts.

The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment

Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring

The Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.

The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery or XP95 loop

The Output Unit provides a voltage free single pole, changeover relay output. It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.Capable of switching up to 30V at 1AVoltage free, change-over relay outputShort-circuit isolatorCapable of switching up to 30V at 1AWall mounted (surface)Dimensions: 150x90x48mm

Designed and made according to EN54 and EN12094-1 standards (with J400-EXT extinguishment module), the J408 is a microprocessor based control panel for small to medium applications. 2 (J408-2) controlled, balanced, bypassable input zonesEach detection zone has an alarm-repeat output for selective management in the event of fire. The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc

8 basic fire alarm zones with the possibility to expand to 20 zones with M-Z(f) moduleThree types of verification2 programmable relay outputs2 "Notification" controlled outputs"Fire" and "Fault" outputs.Color: black

8 basic fire alarm zones with the possibility to expand to 20 zones with M-Z(f) moduleThree types of verification2 programmable relay outputs2 "Notification" controlled outputs"Fire" and "Fault" outputs.

The Three Channel Input/Output Unit provides three voltage-free, single pole, changeover relay outputs and three monitored switch inputs

Conventional fire-detection control panel.4 zones expandable to 20

Designed and made according to EN54 and EN12094-1 standards (with J400-EXT extinguishment module), the J408 is a microprocessor based control panel for small to medium applications. 4 (J408-2) controlled, balanced, bypassable input zonesEach detection zone has an alarm-repeat output for selective management in the event of fire. The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc

Designed and made according to EN54 and EN12094-1 standards (with J400-EXT extinguishment module), the J408 is a microprocessor based control panel for small to medium applications. 8 (J408-8) controlled, balanced, bypassable input zonesEach detection zone has an alarm-repeat output for selective management in the event of fire. The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc

Conventional fire-detection control panel.4 zones expandable to 36

Designed and made according to EN54 standards, the J424 is a microprocessor based control panel for medium and large applications.It has 8 zones main board and supports two J400- EXP8 expander modules, for a total of 24 zones and 504 detectors.Each detection zone is equipped with an alarmrepeat output for selective alarm management in the event of fire.The control panel has supervised and silenceable alarm outputs for the control of the self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc. This easy-to-use control panel is protected by a lockable frontplate which allows operational access to authorized personnel only.The J424 control panel is also available with a backlit display, which shows all the information regarding the control panel status.The optional Software in Windows™ environment, allows full systems management of events memory, files, reset and all the programmable functions provided by the control panel.