chevron_left
chevron_right
Tiras PRIME 8L
- 8 basic fire alarm zones with the possibility to expand to 20 zones with M-Z(f) module
- Three types of verification
- 2 programmable relay outputs
- 2 "Notification" controlled outputs
- "Fire" and "Fault" outputs.
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
- Zones
- Number of zones: 8 base zones with the possibility to expand to 20 zones;
- Zone voltage: 24 V (nominal);
- Number of detectors in the zone: no more than 32 pcs;
- Terminal resistor resistance: 6.8 kOhms or 3.9kOhms;
- Additional resistor resistance (two-wire circuit): 1kOm;
- Shunt resistor resistance (four-wire circuit): not supported.
- Outputs/inputs
- Output typequantity: 2 “alert” outputs, 2 programmable relay outputs, outputs "Fire" and "Fault".
- Programing software
- Output typequantity: 2 “alert” outputs, 2 programmable relay outputs, outputs "Fire" and "Fault".
- Zone extension modules, extra outputs
- Modules: M-Z(f), M-OUT4R
- Power supply unit
- Primary power source and current consumption: 220V (-15% + 10%), 50 ± 1 Hz, 0.27 A;
- Maximum load current on outputs (for external devices): 2x24V x400 mA;
- Maximum current on alert output: 2x3 A (switching);
- Power backup – Type/capacity: 2 lead-acid batteries; 7 Ah, 12 V or 9 Ah, 12 V;
- Minimal current consumption form the battery: 75 mA.
- General characteristics
- Operating temperature: from -5°C to + 40°C;
- Dimensions: 350x370x96 mm;
- Weight: 4 kg (without battery);
- Housing material: plastic;
- Enclosure protection rate: IP30;
- Average lifetime: not less than 10 years.
- Features of control panels:
- Verification of A, B and C type in zones (according to EN 54-2);
- Event Log – 1000 events;
- Real Time Clock;
- Night and day mode;
- Scenarios of outputs;
- USB-connection;
- Smart charger;
- Powerful pulse power supply.
CGTIRASPRIME8L
2.63 kg
9 other products in the same category:
