chevron_left
chevron_right
Bentel J424 (8 to 24 zone)
- Designed and made according to EN54 standards, the J424 is a microprocessor based control panel for medium and large applications.
- It has 8 zones main board and supports two J400- EXP8 expander modules, for a total of 24 zones and 504 detectors.
- Each detection zone is equipped with an alarmrepeat output for selective alarm management in the event of fire.
- The control panel has supervised and silenceable alarm outputs for the control of the self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc. This easy-to-use control panel is protected by a lockable frontplate which allows operational access to authorized personnel only.
- The J424 control panel is also available with a backlit display, which shows all the information regarding the control panel status.
- The optional Software in Windows™ environment, allows full systems management of events memory, files, reset and all the programmable functions provided by the control panel.
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
- 8 controlled, balanced, bypassable input zones expandable to
- 24 by means of two 8 zone expanders
- Optional backlit display
- RS485 bus
- Power supply: 230 Vac ±10%
- 27.6 Vdc 2.5 A switching supply/battery-charger
- Compartment for two 12 Vdc 17 Ah batteries
- Dimensions (wxhxd): 422x502x116 mm
- Weight (without batteries): max. 8.5 Kg
FEATURES
- Conforms with EN54
- Up to 21 devices can be connected to each zone: conventional fire detectors, alarm buttons, gas detectors
- Gas zone compatible with 4 – 20 mA gas detectors
- One alarm-repeat output (open collector) for each input zone
- Manual call point recognition
- Signals missing detectors
- 2 supervised, silenceable, bypassable 24 V alarm output for the activation of piezoelectric sirens, fire bells and flashers
- Silenceable fault-warning output for the activation of signalling and auxiliary devices
- Supervised fire output for telephone dialler activation
- Programmable open-collector output
- Dry contact alarm-relay for the activation of auxiliary devices
- Day/Night mode
- Alarm verification time
- Programmable restoral and reset times
- Programmable from PC or keypad
- 50 event log viewed via PC
- Alarm/fault memory activated until next reset
- Command for silencing sirens
- Keypad commands require key or pin code
9 other products in the same category:
Viewed products
