Home

The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.

Unipos Remote indicator

Manufacturer: UniposWith LED contactsWith base10-30V DC

Conventional Optical-Smoke DetectorWith mounting baseTwo LED indicatorsSupply voltage 10-30V DCCurrent consumption in Alarm condition: 8mA/10V DC, 25mA/30V DCCurrent consumption in Standby mode - 120µAOutput in Alarm condition for LED indicatorOperation temperature range -10°C iki +55°CDegree of Protection IP43Complies with EN54-7

Addressable rate of rise heat detector

Standalone smoke sensor
Litium battery 3V (replaceble)
Working period up to 10 years
Alarm sound level 85dB/3m
test button

It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.

Detects smoke and visible particles which arise by a smoldering fire
Soundlevel of alarm: 85 dB/3m
Low battery indication
Battery required: Yes (1x battery CR123A)
Battery lifetime: 3 years
Wireless technology: Wifi
Smoke Sensor applies DIN EN14604

Carbon Monoxide sensor with WiFi;
Red alarm LED indicator, sound level 85 dB / 3 m;
Power  DC 2*1.5V Alkaline AA LR6
Operating temperature -10°C ~ +40°C;
Operating humidity <=95% RH without condensation;
Wall mounting or ceiling mounting;
Conform to EN 50291-1:2018
Sensor lifespan 10 years;
Battery life 5 years

Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.

Addressable sounder beacon device – base with built-in short-circuit isolator and accumulator battery, is used for sound and flash indication on registered events by the Interactive fire alarm panel IFS7002. The FD7204 is used for indoor applications.