Active filters

Power supply unit INIM IPS24160G
Out-of-Stock
Power supply unit INIM IPS24160G
Out-of-Stock
Inim IPS24160G Switching power supply - battery charger. 230 V AC / 27,6 V DC; max. 160 W: 4 A load and 1,2 A to charge in same time.Protected against overload, short circuit and reverse polarity.
€106.29
Details View details  
INIM SmartLoop/2080-G
Out-of-Stock
INIM SmartLoop/2080-G
Out-of-Stock
2 loops expandable to 8 (for 2080 expandable models)all models in the SmartLoop series are EN54 Approvedmultiprocessor hardware structure32 bit main CPUOpenLoop TechnologyHorNet token- ring architecturemanages up to 30 panel token-ring network via the SmartLoop/NET board (accessory item)easy remote access through SmartLAN board (accessory item)2 or 4 wire loop connectionsupports 240 devices per loopmanages up to 8 remote-control Repeater panels connected to the RS485 Interface3 general purpose NAC outputs1 NAC Alarm output1 NAC Trouble output1 dry contact Alarm relay1 dry contact Trouble relay
€1,226.35
Details View details  
Signaline HD+ controller for programmable heat-sensitive cable
NewOut-of-Stock
Signaline HD+ controller for programmable heat-sensitive cable
Out-of-Stock
Type: Controller for programmable heat-sensitive cable Model: Signaline HD+ Controller Certifications: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -20°C to +50°C Operating voltage: 20Vdc - 30Vdc (VdS EN54), 23Vdc - 30Vdc (UL) Current consumption (without LCD backlight): 31mA @ 20Vdc to 20mA @ 30Vdc Current consumption (without LCD and alarm): 61mA @ 20Vdc to 39mA @ 30Vdc Current consumption (with LCD and alarm): 85mA @ 20Vdc to 59mA @ 30Vdc Alarm output: Alarm & Pre-alarm FORM C, 2A @ 30Vdc (resistive, 60W), 0.25A @ 250Vac (62.5VA) Fault output: Normally closed opto-isolated phototransistor (Max V: 35Vdc, Max I: 80mA, Max P: 150mW) Modbus output: 2-wire RS-485 Modbus RTU or ASCII IP and impact rating: IP65 (IK08) Weight: 860 g
€1,106.98
Details View details  
Signaline HD+ EOL controller for programmable heat-sensitive cable
NewOut-of-Stock
Signaline HD+ EOL controller for programmable heat-sensitive cable
Out-of-Stock
Type: End-of-line controller Model: Signaline HD+ End of Line Application: For programmable heat-sensitive cable Alarm class: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -40°C to +125°C Mounting: External fixing bracket (included) Enclosure material: Aluminium IP and impact rating: IP65 Weight: 115 g
€138.98
Details View details  
Signaline FT-185-R
Signaline FT-185-R
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated
€11.83
SIGNALINE cable FT-78-EN
SIGNALINE cable FT-78-EN
Fixed alarm temperature of 78°CNo false alarmsUp to 1.000m per zoneEN54-28:2016 approved
€5.72
SIGNALINE cable FT-88-EN
SIGNALINE cable FT-88-EN
Fixed alarm temperature of 88°CNo false alarmsUp to 1.000m per zoneEN54-28:2016 approved
€5.72
Signaline FT-68
Out-of-Stock
Signaline FT-68
Out-of-Stock
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated
€5.31
Details View details  
Signaline FT-88
Signaline FT-88
Signaline Fixed Temperature Heat Sensing Cable (Signaline FT) detects a build up of heat anywhere along its length. When any point along the length of the cable reaches a predetermined temperature an alarm is initiated
€5.31