Active filters

Forteza TRIBO connection sleeve (CS)
Forteza TRIBO connection sleeve (CS)
The connection sleeve is meant for connecting the sensitive element together with its non-sensitive element which connected to the signal processing unit for the connection point shielding and sealing.
€22.17
Forteza TRIBO end connection box
Forteza TRIBO end connection box
The connection sleeve is meant for connecting the sensitive element together with its non-sensitive element which connected to the signal processing unit for the connection point shielding and sealing.
€22.17
USB/RS485 interface for Forteza
USB/RS485 interface for Forteza
For connecting TRIBO-S or FMC sensors to a computer (Windows)Powered by a USB portPower consumption (max.): 35 mA ( no load on RS-485 side)No galvanic isolation USB / RS485
€85.03
Forteza Tribo-S (2)
Forteza Tribo-S (2)
The system is intended for the protection of any type of fences from climbing over or destruction2 rel. outputs (2 zones)Max. 300m / for one zoneWindows, Android configuration
€1,501.05
Forteza Tribo-S (4)
Forteza Tribo-S (4)
The system is intended for the protection of any type of fences from climbing over or destruction4 relay outputsMax. 300mWindows, Android configuration
€2,393.84
Forteza TRIBO sensitive element SE-86
Forteza TRIBO sensitive element SE-86
Sensitive element is a part of the TRIBO-S fence protection system which registers deformation and vibration of the protection fence section, where is mounted sensitive elementSection element conencted to Tribo-S procesing unit directly or by using non-sensitive (NON-SE) wireIntended for the protection of any types of fences from an intrusion by means of climbing over or destroying themPrice for 1m
€1.25