Home
Subcategories
There are 193 products.
Out-of-Stock
UTEPO UTP101PV-HD5
Out-of-Stock
The 1ch HD analog video & power transceiver transfers real-time analog video signal, supplies stable 12V/0.8A DC power for the remote cameras through Cat5/5e/6 cable, and passes back video signal up to 500m
€20.74
Out-of-Stock
UTEPO UTP3-GSW2404-TSP420
Out-of-Stock
The 24 Ports Gigabit PoE Ethernet Switch is an unmanaged Ethernet switch designed for Gigabit Ethernet access and PoE applications. It provides 24 Gigabit downlink ports, two Gigabit uplink Ethernet port, and two Gigabit optical SFP module slotOf which 1-24 / 16 Gigabit ports are supported 802.3af/at standard PoE power supply.
€384.72
Out-of-Stock
UTEPO UTP3-GSW2404-TSP200
Out-of-Stock
The 24 Ports Gigabit PoE Ethernet Switch is an unmanaged Ethernet switch designed for Gigabit Ethernet access and PoE applications. It provides 24 Gigabit downlink ports, two Gigabit uplink Ethernet port, and two Gigabit optical SFP module slotOf which 1-16 Gigabit ports are supported 802.3af/at standard PoE power supply
€313.63
Apollo Series S65 Conventional heat detector with LED indicator (55000-121APO)
ConventionalWith flashing LED
€13.00
Out-of-Stock
Apollo XP95 Protocol Translator - 55000-855APO
Out-of-Stock
Protocol Translators are installed in the safe area ensuring integrity of communication between control equipment and field devices and safety within the limits of BASEEFA approvals
€129.18
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
€63.77
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
€7.27
Orbis Heat Detectors
The Orbis Heat Detector monitors the temperatureRed flashing LED at StartUp confirms that the device is operatingSensAlert, yellow flashing LED, indicates faulty operation
€15.78
Orbis LX Base
LX Base has two slots for fixing screws at a spacing of 51mm and 69mmOne way fitDetector locking mechanism
€3.11
Orbis Optical Smoke Detector
Optical Smoke Detector operates on the well established light scatter principle. The sensing technology used to radically different from the previous optical detectors and significantly reduces false alarms
€16.84
Orbis Heat Detector
Heat Detector monitors the temperature by using a single thermistor which provides a coltage output proportional to the external air temperature
€16.67
Out-of-Stock
Orbis Multisensor Smoke Detector
Out-of-Stock
The Orbis Multisensor Detector benefits from the same false alarm reduction technology as the optical detector, enhanced by the addition of a thermal sensing element
€24.85
Out-of-Stock
Apollo XP95 Manual Call Point Tranparent Hinged Cover 26729-152
Out-of-Stock
The Transparent Hinged Cover is for use with XP95 and Discovery Manual Call PointsCan be fitted to add further protection against accidental operation
€8.18
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring
€66.26
Apollo Series S65 thermal detector (55000-122APO)
The Series S65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperatureWide-operating voltage of 9–33 V DC
€13.00
Apollo Series S65 Base
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
€2.61
ORBIS IS Optical smoke detector
The sensing technology in the Orbis IS optical smoke detector is significantly different in design from previous optical detectors
€171.69
ORBIS IS heat detector
The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2000 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.
€150.51
Out-of-Stock
€22.16
