Active filters

Apollo Series S65 Base
Turime sandėlyje
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
Orbis LX Base
Turime sandėlyje
LX Base has two slots for fixing screws at a spacing of 51mm and 69mmOne way fitDetector locking mechanism
Orbis Marine TimeSaver Base
Out-of-Stock. Ask the seller
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
Address base detector card pack Apollo XP95 XPE...
Turime sandėlyje
Allows installation in all base types, meaning you only need to carry this one type of card alleviating the need for multiple cards when using Apollo products Flexibility to create any address; includes 128th pip for CoreProtocol systems An additional lead-in on the address pips allows for a higher tolerance Simplifies and speeds up installation and commissioning Address remains the same, no matter how often the detectors are replaced
PIR Detector Optex RX-Core-ST
Turime sandėlyje
The LX Series is robust, weatherproof and specifically designed for short-range outdoor applicationsWith wide-angle and long-range options, advanced features such as sensitivity and range adjustment and a built-in light sensor providing day and night modes, the LX Series is highly versatileAn ingenious mirror assembly provides a pet alley configuration and Double Conductive Shielding ensures that the sensor is resistant to interference from foreign light sources such as the sun and car headlights
Orbis Heat Detectors
Turime sandėlyje
The Orbis Heat Detector monitors the temperatureRed flashing LED at StartUp confirms that the device is operatingSensAlert, yellow flashing LED, indicates faulty operation
Orbis Heat Detector
Turime sandėlyje
Heat Detector monitors the temperature by using a single thermistor which provides a coltage output proportional to the external air temperature
Orbis Optical Smoke Detector
Turime sandėlyje
Optical Smoke Detector operates on the well established light scatter principle. The sensing technology used to radically different from the previous optical detectors and significantly reduces false alarms
Orbis TimeSaver Relay Base
Turime sandėlyje
The TimeSaver Relay Base incorporates a single-pole, voltage-free, changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is resetGrouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A
Outdoor PIR Detector Optex HX-40RAM
Out-of-Stock. Ask the seller
Long battery lifeActive IR digital anti-maskingForm C alarm output and tamper output-soild state swtich-Selectable N.C./N.O. trouble output -solid state swtich-Battery saving timer functionCompatible with numerous wireless transmitters