Active filters

Out-of-Stock
FIRERAY 3000
Out-of-Stock
FIRERAY® 3000 - End to End Infrared Optical Beam Smoke DetectorThe FIRERAY® 3000 End to End Infrared Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties
FIRERAY 3000 DET
Infrared optical beam smoke detectorPower Down Reset Time: >10 seconds2-wire Interface between Controller and Receiver1 Transmitter (clear lens)1 Receiver (dark lens)
€891.15
Out-of-Stock
FIRERAY 5000 controller
Out-of-Stock
FIRERAY 5000 motorised, auto aligning infrared optical beam smoke detector. In complect there are: 1 x-ray detector, a controller and 1x reflective element. Suitable for operation in area up to 50m. Fire Threshold Range: 0.45 - 3.96 dB, 10-60%Delay to Fire: 2-30 sDelay to fault: 2 - 30 sOperating Distance between Detector and Reflector: 8 - 100 mMaximum angular misalignment of Detector: +/- 0.3 DegMaximum angular misalignment of Reflector: +/- 5 DegMaximum angular movement of Detector head: +/- 3,5 DegRapid Obscuration Fault threshold: 87%Housing Flammability rating: UL94 V0
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
Out-of-Stock
FIRERAY 50R
Out-of-Stock
Single Compact HousingArea coverage 50 metre or 100 metre model available12-24 Vdc OperationLow current ConsumptionRobust ConstructionConforms to: BS5839 Part 5 and EN54 part 12, UL and VdS
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
Orbis Heat Detectors
The Orbis Heat Detector monitors the temperatureRed flashing LED at StartUp confirms that the device is operatingSensAlert, yellow flashing LED, indicates faulty operation
€15.78
Out-of-Stock
FIRERAY 100R
Out-of-Stock
Single Compact HousingArea coverage 50 metre or 100 metre model available12-24 Vdc OperationLow current ConsumptionRobust ConstructionConforms to: BS5839 Part 5 and EN54 part 12, UL and VdS
Orbis LX Base
LX Base has two slots for fixing screws at a spacing of 51mm and 69mmOne way fitDetector locking mechanism
€3.11
Orbis Optical Smoke Detector
Optical Smoke Detector operates on the well established light scatter principle. The sensing technology used to radically different from the previous optical detectors and significantly reduces false alarms
€16.84
Orbis Heat Detector
Heat Detector monitors the temperature by using a single thermistor which provides a coltage output proportional to the external air temperature
€16.67
Beam smoke detector FIRERAY ONE
Detection range 0 to 50m; 0 to 120m with Refl ective Long Range KitIntegrated visible laser and auto-alignment for ultimate ease of alignment14-36 VDCIP55
€534.69
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring
€66.26
Apollo Series S65 thermal detector (55000-122APO)
The Series S65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperatureWide-operating voltage of 9–33 V DC
€13.00
Apollo Series S65 Base
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
€2.61
ORBIS IS Optical smoke detector
The sensing technology in the Orbis IS optical smoke detector is significantly different in design from previous optical detectors
€171.69
ORBIS IS heat detector
The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2000 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.
€150.51
Atšvaitas dūmų detektoriui Fireray
Atšvaitas spinduliniams dūmų detektoriams FR 50R/100R ir FR5000Naudojant keletą atšvaitų, taip išplečiant atspindintį paviršių, išgaunamas didesnis tikslumasNaudojant FIRERAY 5000 ir 4 atšvaitus barjero darbinis atstumas padideja iki 100 m
€17.13
FIRERAY 5000 DET
FIRERAY 5000 detector with reflector element. 5000 FIRERAY system 50 m.Response Threshold: 0,45 - 3,98 dBDelay to Alarm - user settable (default 10 sec): 2-30 sec.Maximum angular misalignment of Detector from optical axis: +/-0,3 DegMaximum angular misalignment ofReflector from optical axis: +/-5 DegMaximum angular alignment: +/-3,5 DegFault level/Rapid obscuration: 87 %Contact Voltage - Fire & Fault relays (DPCO): 0.1 - 36 VDCContact Current -  Fire & Fault relays (DPCO):0.1 - 100 mAHousing flammability rating: UL94V0 
€590.29
Out-of-Stock
Orbis TimeSaver Relay Base
Out-of-Stock
The TimeSaver Relay Base incorporates a single-pole, voltage-free, changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is resetGrouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A
FIRERAY 5000
Up to 2 optical beam detectors per system controllerEasifit Fix SystemGround Level ControlLaser Assisted AlignmentAuto-Optimise Beam AlignmentContamination CompensationBuilding Shift CompensationApproved to EN54:12 and UL268
€770.15