Active filters

Out-of-Stock
Security system kit SECOLINK GSV4B+KM20B+CAS6
Out-of-Stock
Kit includes control panel GSV4B, keypad KM20B and plastic case CAS6 with integrated transformer5 wired zones1 PGM outputs5 usersArea 116 timersAlarm notification by GSM call, SMS512 event memoryRemote system control using Android or IphoneEN50131, Grade2
Out-of-Stock
Signaline HD+ controller for programmable heat-sensitive cable
Out-of-Stock
Type: Controller for programmable heat-sensitive cable Model: Signaline HD+ Controller Certifications: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -20°C to +50°C Operating voltage: 20Vdc - 30Vdc (VdS EN54), 23Vdc - 30Vdc (UL) Current consumption (without LCD backlight): 31mA @ 20Vdc to 20mA @ 30Vdc Current consumption (without LCD and alarm): 61mA @ 20Vdc to 39mA @ 30Vdc Current consumption (with LCD and alarm): 85mA @ 20Vdc to 59mA @ 30Vdc Alarm output: Alarm & Pre-alarm FORM C, 2A @ 30Vdc (resistive, 60W), 0.25A @ 250Vac (62.5VA) Fault output: Normally closed opto-isolated phototransistor (Max V: 35Vdc, Max I: 80mA, Max P: 150mW) Modbus output: 2-wire RS-485 Modbus RTU or ASCII IP and impact rating: IP65 (IK08) Weight: 860 g
Out-of-Stock
Paradox EVOHD
Out-of-Stock
Faster - dialer over VOIP lines at 1200 baudEfficient battery charging - up to 1.5A2.5A switching, 2A power available for modules/devices (requires a 75VA transformer)Provides continuous power, management and two-way communication between control panel and modulesEfficient and effective use of zone deploymentIntegrated tamper reporting of EVOHD connected devices without additional wiring4 on-board, solid-state PGMs (2-4)1 on-board 5A relay PGMPGM1 may be used as a 2-wire smoke input
Out-of-Stock
Signaline HD+ EOL controller for programmable heat-sensitive cable
Out-of-Stock
Type: End-of-line controller Model: Signaline HD+ End of Line Application: For programmable heat-sensitive cable Alarm class: EN54-22:2015+A1:2020 (Class A1I, A2I, BI), UL521 Operating temperature: -40°C to +125°C Mounting: External fixing bracket (included) Enclosure material: Aluminium IP and impact rating: IP65 Weight: 115 g
Out-of-Stock
Paradox WIFI detector NV780MX
Out-of-Stock
Dual side anti-masking detection - Active IR detection, fast 20 seconds detection designed for outdoor detecting sprayed liquids and blocking items up to 25 cm (10 in.)Pet Immunity capability, up to 40 kg (90 lb)4 dual element sensors arrangementHigh efficiency long focal point (1.77 in.) LoDiff lensCombination optics - mirror and Fresnel Lens for optimal sharp detectionWireless frequency selection NV780MR support two internally selectable frequenciesSingle or Dual operation modesOptical and digital range adjustmentsDual LED and buzzer indicatorsWall-mount, with built-in level tool
Out-of-Stock
Electronic module expander ROGER XM-2DR-BRD
Out-of-Stock
Electronic module of XM-2DR I/O expander without plastic enclosureTwo NO/NC inputsRelay output with single NO/NC contact and 1.5A/30VDC max loadRelay output with single NO/NC contact and 5A/230VAC max loadVersion without enclosureCommunication by means of RACS Clock&Data protocol or standalone operation
Out-of-Stock
ROGER CPR32-NET-BRD
Out-of-Stock
CPR32-NET-BRD network controller expands functionality of RACS 4 system and due to the built-in Ethernet interface allows for management of the access control system through LAN or WAN network.The most important features provided by CPR32-NET-BRD are: centralized event buffer, centralized clock and calendar, global anti-passback and connection of controllers in concurrently armed and disarmed alarm zones.Additionally, CPR32-NET-BRD offers software integration with Integra series intruder alarm panels (SATEL) and management of 16 wireless Sallis door locks (SALTO).
Out-of-Stock
ROGER MC16-2
Out-of-Stock
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.