Active filters

Out-of-Stock
Security system kit SECOLINK GSV4B+KM20B+CAS6
Out-of-Stock
Kit includes control panel GSV4B, keypad KM20B and plastic case CAS6 with integrated transformer5 wired zones1 PGM outputs5 usersArea 116 timersAlarm notification by GSM call, SMS512 event memoryRemote system control using Android or IphoneEN50131, Grade2
Out-of-Stock
Combined smoke + heat conventional detector UNIPOS FD8060
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
Out-of-Stock
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
Out-of-Stock
UNIPOS FD7120 heat detector base
Out-of-Stock
The fire detector provides reliable early warning of a Fire condition upon reaching a rate of rise of the temperature or fixed temperature threshold in the protected premises. The temperature class (A1R, A2R or BR) is in compliance with the European Standard EN54-5 and is programmable by Fire Control Panel IFS7002. The fire detector is suitable for premises with normal ambient temperature, without possible sudden changes.
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
Out-of-Stock
UNIPOS FD7150 Manual Call Point
Out-of-Stock
It is designated to release a signal for a Fire condition to the Fire Control Panel IFS7002 upon manual activation by breaking the glass on the place, signed with arrows. The light indication for activating the manual call point is provided by a red LED. There is possibility for testing by a special key.It satisfies the requirements if the European Standard EN54-11 for a type A manual call point and EN54-17.
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
Out-of-Stock
UNIPOS FD7204 Sounder (indoor)
Out-of-Stock
Addressable sounder beacon device – base with built-in short-circuit isolator and accumulator battery, is used for sound and flash indication on registered events by the Interactive fire alarm panel IFS7002. The FD7204 is used for indoor applications.