Active filters

Out-of-Stock
FIRERAY 3000
Out-of-Stock
FIRERAY® 3000 - End to End Infrared Optical Beam Smoke DetectorThe FIRERAY® 3000 End to End Infrared Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties
Out-of-Stock
FIRERAY 5000 controller
Out-of-Stock
FIRERAY 5000 motorised, auto aligning infrared optical beam smoke detector. In complect there are: 1 x-ray detector, a controller and 1x reflective element. Suitable for operation in area up to 50m. Fire Threshold Range: 0.45 - 3.96 dB, 10-60%Delay to Fire: 2-30 sDelay to fault: 2 - 30 sOperating Distance between Detector and Reflector: 8 - 100 mMaximum angular misalignment of Detector: +/- 0.3 DegMaximum angular misalignment of Reflector: +/- 5 DegMaximum angular movement of Detector head: +/- 3,5 DegRapid Obscuration Fault threshold: 87%Housing Flammability rating: UL94 V0
Out-of-Stock
Electronic module expander ROGER XM-2DR-BRD
Out-of-Stock
Electronic module of XM-2DR I/O expander without plastic enclosureTwo NO/NC inputsRelay output with single NO/NC contact and 1.5A/30VDC max loadRelay output with single NO/NC contact and 5A/230VAC max loadVersion without enclosureCommunication by means of RACS Clock&Data protocol or standalone operation
Out-of-Stock
FIRERAY 50R
Out-of-Stock
Single Compact HousingArea coverage 50 metre or 100 metre model available12-24 Vdc OperationLow current ConsumptionRobust ConstructionConforms to: BS5839 Part 5 and EN54 part 12, UL and VdS
Out-of-Stock
FIRERAY 100R
Out-of-Stock
Single Compact HousingArea coverage 50 metre or 100 metre model available12-24 Vdc OperationLow current ConsumptionRobust ConstructionConforms to: BS5839 Part 5 and EN54 part 12, UL and VdS
Out-of-Stock
ROGER MC16-2
Out-of-Stock
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.
Out-of-Stock
ROGER PR611-G
Out-of-Stock
Outdoor access controllerBuilt-in EM 125 kHz proximity readerBolted contactsSilicone keypad with backlightMountable directly in a 60 mmgang boxDark grey case
Out-of-Stock
Plastic enclosure ROGER PR102DR
Out-of-Stock
PR102DR - controller in DIN 35mm rail plastic enclosureSingle door access controllerAdapted to connection of two External PRT series (Roger) readers12 VDC power supplyMounted inside plastic enclosure dedicated to installation on 35mm DIN railPR102DR is the simplest device within advanced series controllers and it offers the most essential functions, including event buffer and real time clock
Out-of-Stock
ROGER MC16-1
Out-of-Stock
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.
Out-of-Stock
ROGER MC16-3
Out-of-Stock
The MC16 is a multi-door physical access and building automation controller dedicated to RACS 5 system. Depending on the version, it allows to control up to 16 two-way doors and 32 automation nodes (states). MC16 can be integrated with intruder alarm system by means of IO lines. The MC16 can be used as data collector device for time and attendance reporting systems. Generally, controller was designed to operate with MCT (RS485) series readers, nevertheless it can work with Wiegand and RACS CLK/DTA readers as well. The RS485 communication bus allows free cable topology (e.g. three, star and combination of them) and accepts any type of signal cables.Controller is equipped with Ethernet interface which is used for system configuration and management. System is managed by VISO client-server Windows application operating with Microsoft SQL Server or Microsoft SQL Server Compact database. Communication between PC and controller is fully encrypted using AES-128-CBC method and can be conducted either in LAN or WAN computer networks. Usually, system configuration takes less than one minute and doesn’t depend on number of controllers which is theoretically unlimited.