Active filters

Out-of-Stock
FIRERAY 3000
Out-of-Stock
FIRERAY® 3000 - End to End Infrared Optical Beam Smoke DetectorThe FIRERAY® 3000 End to End Infrared Optical Beam Smoke Detector (OBSD) has been designed using the latest optical technology, incorporating modern industrial, electronic and software techniques. This detector offers cost effective protection of large, open area spaces with high ceilings. It is also very suited to applications where access to ceiling mounted smoke detectors presents practical difficulties
Out-of-Stock
FIRERAY 5000 controller
Out-of-Stock
FIRERAY 5000 motorised, auto aligning infrared optical beam smoke detector. In complect there are: 1 x-ray detector, a controller and 1x reflective element. Suitable for operation in area up to 50m. Fire Threshold Range: 0.45 - 3.96 dB, 10-60%Delay to Fire: 2-30 sDelay to fault: 2 - 30 sOperating Distance between Detector and Reflector: 8 - 100 mMaximum angular misalignment of Detector: +/- 0.3 DegMaximum angular misalignment of Reflector: +/- 5 DegMaximum angular movement of Detector head: +/- 3,5 DegRapid Obscuration Fault threshold: 87%Housing Flammability rating: UL94 V0
Out-of-Stock
Apollo XP95 Mini Switch Monitor - 55000-760APO
Out-of-Stock
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
Out-of-Stock
FIRERAY 50R
Out-of-Stock
Single Compact HousingArea coverage 50 metre or 100 metre model available12-24 Vdc OperationLow current ConsumptionRobust ConstructionConforms to: BS5839 Part 5 and EN54 part 12, UL and VdS
Out-of-Stock
Orbis Marine TimeSaver Base
Out-of-Stock
The Orbis Marine TimeSaver Base is a completely new design that provides installers with an open working area with fixing holes shaped to allow a simple mounting procedureGrouped terminals to make wiring easyMultiple fixing centresLED alignment markCable stripping guideContinuity link for voltage testing of zone wiring prior to commissioningDetector locking mechanism
Out-of-Stock
FIRERAY 100R
Out-of-Stock
Single Compact HousingArea coverage 50 metre or 100 metre model available12-24 Vdc OperationLow current ConsumptionRobust ConstructionConforms to: BS5839 Part 5 and EN54 part 12, UL and VdS
Out-of-Stock
Orbis TimeSaver Relay Base
Out-of-Stock
The TimeSaver Relay Base incorporates a single-pole, voltage-free, changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is resetGrouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A