10m pet immune detection up to 24kg animalSelectable EOL (End Of Line) resistorsBlue Wave TechnologyAuto sensitivity featureDigital temperature compensation
Optical Smoke Detector operates on the well established light scatter principle. The sensing technology used to radically different from the previous optical detectors and significantly reduces false alarms
The Orbis Multisensor Detector benefits from the same false alarm reduction technology as the optical detector, enhanced by the addition of a thermal sensing element
Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring
Type: Wireless antenna Model: Ruijie & Reyee RG-AirMetro550G-B Operating distance: 10 km Frequency: 5 GHz Speed: 867 Mbps Protection: IP55 Compatible with additional antennas Ports: 2x 10/100/1000M ports, 1x 12V DC port Supports installation with an antenna Single station support: Up to 32 CPEs
The Series S65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperatureWide-operating voltage of 9–33 V DC
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2000 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.