Active filters

Apollo Series S65 thermal detector (55000-122APO)
The Series S65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperatureWide-operating voltage of 9–33 V DC
€13.00
Apollo Series S65 Base
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
€2.61
ORBIS IS Optical smoke detector
The sensing technology in the Orbis IS optical smoke detector is significantly different in design from previous optical detectors
€171.69
ORBIS IS heat detector
The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2000 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.
€150.51
Orbis IS Base
Orbis IS has been designed to make installation fast and simple
€22.16
PIR Detector Pyronix XDH10TT-AM
Tri-signal detection logicVegetation sway eliminationTri-anti masking technologyDigital temperature compensation3 Microwave frequency bandsBuilt In walk test buzzerWeatherproof sealed opticsHeavy duty ultra violet filter10m volumetric coverageOptional Heavy Duty Wall Bracket
€88.09
DSC Neo HS2016PCBE
6 Zone Control Panel (expandable to 16)2 PGM outputSupports up to 8 keypads
€59.35
Out-of-Stock
DSC Neo HS2064
Out-of-Stock
8 on-board zonesExpandable to 64 wireless and hardwired zones4 PGM outputs: expandable to 80 (HSM2204, HSM2208)Template programmingConnect up to 8 supervised keypadswith keypad zones8 partitions500-event buffer500 user codes (HS2064 E), 95 user codes (HS2064)Interconnected smoke detector support with v1.2 allows for additional warning in potential life-threatening situations
DSC Pro HS3128-KIT1EN
Control panel DSC PowerSeries Pro HS3128-KIT1EN consists:Panel HS3128power supplyHSC3020C
€372.03
DSC Neo HS2016NKE
6 Zone Control Panel (expandable to 16)2 PGM outputSupports up to 8 keypadsWith case PC5003C
€74.23
DSC WK141
WK-141 is a portable, wireless, two-way keypad for DSC WP8010White
€103.02
DSC WK160
WK-160 is two-way wireless user interface for DSC WP8010White
€194.58
Orbis TimeSaver Relay Base
The TimeSaver Relay Base incorporates a single-pole, voltage-free, changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is resetGrouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A
€28.53
PIR Detector Pyronix KX15DT
Dual technology detector using PIR and Microwave sensorsAuto sensitivity feature and digital temperature compensationSelectable EOL (End Of Line) resistorsAND/OR technologyTriple LED indication
€30.59