Active filters

Orbis Multisensor Smoke Detector
Orbis Multisensor Smoke Detector
The Orbis Multisensor Detector benefits from the same false alarm reduction technology as the optical detector, enhanced by the addition of a thermal sensing element
€24.85
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring
€66.26
Apollo Series S65 thermal detector (55000-122APO)
Apollo Series S65 thermal detector (55000-122APO)
The Series S65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperatureWide-operating voltage of 9–33 V DC
€13.00
Apollo Series S65 Base
Apollo Series S65 Base
The bases have been designed to enable detectors to be plugged in without any need for force - particularly useful when fitting to suspended ceilings. All Series 65 bases are lockableThe standard base is identical to the Series 60 base, so uses the same part number, 45681-200. It contains no electronic parts which could be damaged during installation
€2.61
ORBIS IS Optical smoke detector
ORBIS IS Optical smoke detector
The sensing technology in the Orbis IS optical smoke detector is significantly different in design from previous optical detectors
€171.69
ORBIS IS heat detector
ORBIS IS heat detector
The Orbis IS range incorporates seven heat detector classes to suit a wide variety of operating conditions in which smoke detectors are unsuitable. The European standard EN54-5:2000 classifies heat detectors according to the highest ambient temperature in which they can safely be used without risk of false alarm.
€150.51
Orbis IS Base
Orbis IS Base
Orbis IS has been designed to make installation fast and simple
€22.16
DSC Neo HS2016PCBE
DSC Neo HS2016PCBE
6 Zone Control Panel (expandable to 16)2 PGM outputSupports up to 8 keypads
€59.35
DSC Neo HS2064
Out-of-Stock
DSC Neo HS2064
Out-of-Stock
8 on-board zonesExpandable to 64 wireless and hardwired zones4 PGM outputs: expandable to 80 (HSM2204, HSM2208)Template programmingConnect up to 8 supervised keypadswith keypad zones8 partitions500-event buffer500 user codes (HS2064 E), 95 user codes (HS2064)Interconnected smoke detector support with v1.2 allows for additional warning in potential life-threatening situations
€85.27
Details View details  
DSC Pro HS3128-KIT1EN
DSC Pro HS3128-KIT1EN
Control panel DSC PowerSeries Pro HS3128-KIT1EN consists:Panel HS3128power supplyHSC3020C
€372.03
DSC Neo HS2016NKE
DSC Neo HS2016NKE
6 Zone Control Panel (expandable to 16)2 PGM outputSupports up to 8 keypadsWith case PC5003C
€74.23
DSC WK141
DSC WK141
WK-141 is a portable, wireless, two-way keypad for DSC WP8010White
€103.02
DSC WK160
DSC WK160
WK-160 is two-way wireless user interface for DSC WP8010White
€194.58
Orbis TimeSaver Relay Base
Orbis TimeSaver Relay Base
The TimeSaver Relay Base incorporates a single-pole, voltage-free, changeover contact for switching external equipment. When the detector changes to the alarm state, the relay is energised, causing the contact to change state. The contact will remain in this condition until the detector is resetGrouped terminals to make wiring easyTwo fixing centresLED alignment markCable stripping guideDetector locking mechanismContinuity link for voltage testing of zone wiring prior to commissioningCapable of switching up to 30V at 1A
€28.53
Adresable Call Point Teletek SensoIRIS MCP150
Adresable Call Point Teletek SensoIRIS MCP150
Type of the working element – Resettable (flexible)Type ABuilt-in isolatorOptional protective plastic coverRate of protection IP40EN54-11 and EN54-17 certified
€29.69