Active filters

  • Categories: Interfaces clear
  • Categories: Other Fire Equipment clear
UNIPOS FD7201S Conventional line monitoring module
UNIPOS FD7201S Conventional line monitoring module
Out-of-Stock. Ask the seller
Conventional line monitoring module – Designed to connect conventional fire alarm line (with up to 32 fire detectors) as a part of the addressable fire alarm system IFS7000. The built-in short circuit isolators are available. FD7201S is power supplied via the power loop and up to 125 modules can be connected in each of the signal loops. It satisfies the requirements of the European Standard EN54-17 & EN54-18.
€41.01
Details View details  
Apollo XP95 Mini Switch Monitor - 55000-760APO
Apollo XP95 Mini Switch Monitor - 55000-760APO
Turime sandėlyje
The Mini Switch Monitor is an interface within an entirely new housing. Designed in response to customer feedback, the smaller Mini Switch Monitor can be fitted onto a 35mm DIN-Rail with a twist-click motion or mounted in an enclosure such as a manual call pointIt is designed to monitor the state of one or more single pole, volt free contacts connected to a single pair of cables and to report the status to Apollo compatible control equipment
€58.62
Add to cart Buy
Input/output module 2/2, APOLLO XP95, SA4700-104APO
Input/output module 2/2, APOLLO XP95, SA4700-10...
Turime sandėlyje
Improved design for ease of wiring meaning faster installation Contains controllable isolatorAddress range 1 - 254Nine pre-configured modes, including compatibility mode from XP95/Discovery to CoreProtocol systemsFailsafe mode (meets BS 7273-4 requirements)Configurable input stylesEarth fault monitoring
€61.51
Add to cart Buy
Xp95 Input/Output Unit
Xp95 Input/Output Unit
Out-of-Stock. Ask the seller
The Input/Output Unit provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.
€61.51
Details View details  
Loop-Powered Visual Indicator for XP95
Loop-Powered Visual Indicator for XP95
Turime sandėlyje
The Loop-Powered Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.High intensity LEDsMore reliable than xenon visual indicatorsAutomatic LED checkLockableWide angle of visibilityEnables DDA complianceSynchronised flashCan be used with Discovery or XP95
€64.51
Add to cart Buy
XP95 Zone Monitor
XP95 Zone Monitor
Turime sandėlyje
The Zone Monitor powers and controls the operation of a zone of up to 20 Apollo Series 65 or Orbis fire detectors from a Discovery or XP95 loop
€75.36
Add to cart Buy
XP95 Addressable Output Unit with Isolator
XP95 Addressable Output Unit with Isolator
Out-of-Stock. Ask the seller
The Output Unit provides a voltage free single pole, changeover relay output. It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs.Capable of switching up to 30V at 1AVoltage free, change-over relay outputShort-circuit isolatorCapable of switching up to 30V at 1AWall mounted (surface)Dimensions: 150x90x48mm
€83.29
Details View details  
Bentel J408-2 (2-zone)
Bentel J408-2 (2-zone)
Out-of-Stock. Ask the seller
Designed and made according to EN54 and EN12094-1 standards (with J400-EXT extinguishment module), the J408 is a microprocessor based control panel for small to medium applications. 2 (J408-2) controlled, balanced, bypassable input zonesEach detection zone has an alarm-repeat output for selective management in the event of fire. The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc
€149.56
Details View details  
Tiras PRIME 8L (black)
Tiras PRIME 8L (black)
Out-of-Stock. Ask the seller
8 basic fire alarm zones with the possibility to expand to 20 zones with M-Z(f) moduleThree types of verification2 programmable relay outputs2 "Notification" controlled outputs"Fire" and "Fault" outputs.Color: black
€152.17
Details View details  
Tiras PRIME 8L
Tiras PRIME 8L
Turime sandėlyje
8 basic fire alarm zones with the possibility to expand to 20 zones with M-Z(f) moduleThree types of verification2 programmable relay outputs2 "Notification" controlled outputs"Fire" and "Fault" outputs.
€152.17
Add to cart Buy
Bentel J408-4 (4-zone)
Bentel J408-4 (4-zone)
Out-of-Stock. Ask the seller
Designed and made according to EN54 and EN12094-1 standards (with J400-EXT extinguishment module), the J408 is a microprocessor based control panel for small to medium applications. 4 (J408-2) controlled, balanced, bypassable input zonesEach detection zone has an alarm-repeat output for selective management in the event of fire. The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc
€178.07
Details View details  
Bentel J408-8 (8-zone)
Bentel J408-8 (8-zone)
Out-of-Stock. Ask the seller
Designed and made according to EN54 and EN12094-1 standards (with J400-EXT extinguishment module), the J408 is a microprocessor based control panel for small to medium applications. 8 (J408-8) controlled, balanced, bypassable input zonesEach detection zone has an alarm-repeat output for selective management in the event of fire. The control panel has supervised, silenceable alarm-outputs for self-powered sirens, piezoelectric sirens, fire bells, flashers, telephone diallers, etc
€208.82
Details View details  
PREVIDIA LCD repeater
PREVIDIA LCD repeater
Out-of-Stock. Ask the seller
For address control panelPrevidia MAX and Previdia Compact panel repeater;4.3" touchscreen display;TCP/IP conection for networking;HORNET+ interface;
€229.87
Details View details