Security alarm

EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264

Arm and disarm security systemArm and disarm STAY modeConfigure system parametersDisplay information with LED indicatorsInform about system status via sound signaler

EKB2 is a modern design keyboard with LCD intended to use with GSM alarm and management system ESIM264

DIP TO-92-3TME/VinsonESIM264/364/384 (In the sensor system)

Supported by all ESIM364 and some older ESIM384 models Wire length: 1 m

GSM antenna with an SMA type connectionGlass mount3m cable

For Eldes ESIM264/364/384 (in sensor system 8)Voltage 3.0 - 5.5V

Module EPGM8 is used to expand the quantity of outputs in Alarm and Control system ESIM384 to 12 programmable outputs (8 more programmable outputs)

The 16 Zone Expansion Module EPGM1 adds 16 hardwired zones2 Programmable outputs 500mA (PGM) and provides 500mA @ 12VDC auxiliary current

Back up and primary Cellular alarm communicationPanel remote uploading/downloading support via CellularSupervision heartbeats via Cellular128-bit AES encryption via CellularFull event reportingSIA and Contact ID protocolSignal strength and trouble displayVisual verification over CellularCommunicator can be housed in separate cabinet using PCL-422 Communicator Remote Mounting ModuleCommand and Control via SMSE model provides expanded user support with PowerSeries Neo panels V1.2 and higher

Fully redundant Internet and Cellular dual-path alarm communicationIntegrated call routingPanel remote uploading/downloading support via Cellular and InternetSupervision heartbeats via Cellular and Internet128-bit AES encryption via Cellular and InternetFull event reportingSIA and Contact ID protocolActive Cellular account is required to use IP functionSignal strength and trouble displayVisual verification over Cellular or InternetCommunicator can be housed in separate cabinet using PCL-422 Communicator Remote Mounting ModuleCommand and Control via SMSE model provides expanded user support and up to 4 ethernet integrations with PowerSeries Neo panels V1.2 and higher