chevron_left
chevron_right
New
Router Teltonika RUTM08
- Type: Router
- Model: Teltonika RUTM08
- Ports: 1 x WAN, 3 x LAN, 4 x RJ45 (1000 Mbps), 1 x USB Type A
- Memory: 256 MB DDR3 RAM, 16 MB NOR + 256 MB NAND Flash
- Operating system: RutOS
- Power input: 1 x 4-pin DC (8–50 VDC)
- Power output: 1 x 50 V 300 mA
- Support: DLMS
- Operating temperature: -40...75°C
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
- Ethernet
- WAN1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- Network
- RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
- Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
- VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- FirewallPort forward, traffic rules, custom rules, TTL target customisation
- Firewall status pageView all your Firewall statistics, rules, and rule counters
- Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
- Network topologyVisual representation of your network, showing which devices are connected to which other devices
- DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
- QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNSSupported >25 service providers, others can be configured manually
- DNS over HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
- Network backupVRRP, Wired options, each of which can be used as an automatic Failover
- Load balancingBalance Internet traffic over multiple WAN connections
- HotspotCaptive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
- SSHFSPossibility to mount remote file system via SSH protocol
- VRF supportInitial virtual routing and forwarding (VRF) support
- Traffic ManagementReal-time monitoring, wireless signal charts, traffic usage history
- Security
- 802.1xPort-based network access control client
- AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
- FirewallPreconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
- Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLANPort and tag-based VLAN separation
- WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access controlFlexible access control of SSH, Web interface, CLI and Telnet
- SSL certificate generationLet's Encrypt and SCEP certificate generation methods
- VPN
- OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
- OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,
- IPsecXFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
- GREGRE tunnel, GRE tunnel over IPsec support
- PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
- StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPNMethod of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
- SSTPSSTP client instance support
- ZeroTierZeroTier VPN client support
- WireGuardWireGuard VPN client and server support
- TincTinc offers encryption, authentication and compression in it's tunnels. Client and server support.
- TailscaleTailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
- OPC UA
- Supported modesClient, Server
- Supported connection typesTCP
- MODBUS
- Supported modesServer, Client
- Supported connection typesTCP, USB
- Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
- Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
- DATA TO SERVER
- ProtocolHTTP(S), MQTT, Azure MQTT
- Data to serverExtract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
- MQTT Gateway
- Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker
- DNP3
- Supported modesStation, Outstation
- Supported connectionTCP, USB
- DLMS
- DLMS SupportDLMS - standard protocol for utility meter data exchange
- Supported modesClient
- Supported connection typesTCP, USB
- COSEMAllows to scan meter COSEM objects for automatic detection and configuration
- API
- Teltonika Networks Web API (beta) supportExpand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
- Monitoring & Management
- WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
- FOTAFirmware update from server, automatic notification
- SSHSSH (v1, v2)
- EmailReceive email message status alerts of various services
- TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTTMQTT Broker, MQTT publisher
- SNMPSNMP (v1, v2, v3), SNMP Trap, Brute force protection
- JSON-RPCManagement API over HTTP/HTTPS
- RMSTeltonika Remote Management System (RMS)
- IoT Platforms
- Cumulocity - Cloud of ThingsAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP. Has reboot and firmware upgrade actions
- Azure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
- System Characteristics
- CPUMediaTek, Dual-Core, 880 MHz, MIPS1004Kc
- RAM256MB, DDR3
- FLASH storage16 MB serial NOR flash, 256 MB serial NAND flash
- Firmware / Configuration
- WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
- FOTAUpdate FW
- RMSUpdate FW/configuration for multiple devices at once
- Keep settingsUpdate FW without losing current configuration
- Factory settings resetA full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
- FIRMWARE CUSTOMISATION
- Operating systemRutOS (OpenWrt based Linux OS)
- Supported languagesBusybox shell, Lua, C, C++
- Development toolsSDK package with build environment provided
- GPL customizationYou can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
- Package ManagerThe Package Manager is a service used to install additional software on the device
- USB
- Data rateUSB 2.0
- ApplicationsSamba share, USB-to-serial
- External devicesPossibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
- Storage formatsFAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
- Input / Output
- Input1 x Digital Input, 0 - 6 V detected as logic low, 8 - 50 V detected as logic high
- Output1 x Digital Output, Open collector output, max output 50 V, 300 mA
- EventsEmail, RMS
- I/O jugglerAllows to set certain I/O conditions to initiate event
- Power
- Connector4-pin industrial DC power socket
- Input voltage range9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
- PoE (passive)Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 50 VDC
- Power consumptionIdle: < 1.8 W / Max: < 5.5 W
- Physical Interfaces
- Ethernet4 x RJ45 ports, 10/100/1000 Mbps
- I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
- Status LEDs8 x LAN status LEDs, 1 x Power LED
- Power1 x 4-pin power connector
- USB1 x USB A port for external devices
- ResetReboot/User default reset/Factory reset button
- Other1 x Grounding screw
- Physical Specification
- Casing materialAnodized aluminum housing and panels
- Dimensions (W x H x D)115 x 32.2 x 95.2 mm
- Weight353 g
- Mounting optionsDIN rail, wall mount, flat surface (all require additional kit)
- Operating Environment
- Operating temperature-40 °C to 75 °C
- Operating humidity10% to 90% non-condensing
- Ingress Protection RatingIP30
- Regulatory & Type Approvals
- RegulatoryCE, UKCA, RCM, CB
- EMC Emissions & Immunity
- StandardsEN 55032:2015+A11:2020
- ESDEN 61000-4-2: 2009
- Radiated ImmunityEN IEC 61000-4-3:2020
- EFTEN 61000-4-4: 2012
- Surge Immunity (AC Mains Power Port)EN 61000-4-5:2014 + A1:2017
- CSEN 61000-4-6:2014
- DIPEN IEC 61000-4-11:2020
- Safety
- StandardsIEC 62368-1:2018
- Safety (Ordinary Locations)
- StandardsCE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020
RUTM08
16 other products in the same category:
