chevron_left
chevron_right
Modem Teltonika RUT206 LTE (4G)
- Type: Modem
- Industrial
- Model: RUT206
- Brand: Teltonika
- Mobile Network: LTE (4G) Cat 4
- Download Speed: Up to 150 Mbps
- Upload Speed: Up to 50 Mbps
- Network Support: UMTS, GSM, GPRS
- LAN Ports: 1x LAN 10/100 Mbps
- WAN Ports: 1x WAN
- Wi-Fi Standard: Wi-Fi 4
- Operating Modes: AP, STA
- SMS Function: Yes
- I/O Ports: 1 Input/Output
- Processor: Mediatek MIPS 24Kc 580 MHz
- Protocols: Modbus, RS232/485
- Power Supply: Passive PoE In, 9-57V
- Protection Rating: IP30
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
- General
- Mobile module4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps
- 3GPP ReleaseRelease 9
- SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
- StatusIMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
- SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- USSDSupports sending and reading Unstructured Supplementary Service Data messages
- Black/White listOperator black/white list (by country or separate operators)
- Band managementBand lock, Used band status display
- SIM idle protection serviceIdle SIM remains inactive until device switches to it, preventing unnecessary data usage
- SIM PIN code managementEnables setting, changing, or disabling the SIM card's PIN
- APNAuto APN
- BridgeDirect connection (bridge) between mobile ISP and device on LAN
- PassthroughRouter assigns its mobile WAN IP address to another device on LAN
- Wireless mode802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)
- Wi-Fi securityWPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
- SSID/ESSIDSSID stealth mode and access control based on MAC address
- Wi-Fi usersUp to 50 simultaneous connections
- Wireless Connectivity FeaturesFast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
- Wireless MAC filterAllowlist, blocklist
- Wireless QR code generatorAuto-connect to network via QR code scanning
- TravelMateForward Wi-Fi hotspot landing page to a subsequent connected device
- WAN1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- LAN1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
- RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing
- Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on LAN (WOL), VXLAN
- VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers for proper VoIP packet routing
- Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- FirewallPort forward, traffic rules, custom rules, TTL target customization
- Firewall status pageView all Firewall statistics, rules, and rule counters
- Ports managementView, enable/disable, configure transmission speed of device ports
- Network topologyVisual representation of connected devices
- DHCPStatic and dynamic IP allocation, DHCP relay, DHCP server configuration, static leases with MAC wildcards
- QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol, or port, WMM, 802.11e
- DDNSSupported for >25 service providers; manual configuration available
- DNS over HTTPSEnables secure DNS resolution via HTTPS
- Network backupWi-Fi WAN, Mobile, VRRP, Wired options for automatic Failover
- Load balancingDistributes Internet traffic over multiple WAN connections
- HotspotCaptive portal, internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, user management, 9 customizable themes
- Hotspot 2.0Seamless, secure, and automatic connection to trusted wireless networks
- SSHFSSupports remote file system mounting via SSH protocol
- Traffic ManagementReal-time monitoring, wireless signal charts, traffic usage history
- AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS authentication, IP & login attempt blocking, built-in random password generator
- FirewallPreconfigured rules via WebUI, unlimited rules via CLI, DMZ, NAT, NAT-T, NAT64
- Attack preventionDDOS protection (SYN flood, SSH, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLANPort and tag-based VLAN separation
- Mobile quota controlCustomizable mobile data limit, warning alerts, phone number configuration
- WEB filterBlacklist for blocking unwanted websites, Whitelist for allowed sites
- Access controlFlexible access control for SSH, Web UI, CLI, and Telnet
- SSL certificate generationSupports Let's Encrypt and SCEP certificate generation
- 802.1xPort-based network access control server
- OpenVPNMultiple clients and server support, 27 encryption methods
- IPsecXFRM, IKEv1, IKEv2, 14 encryption methods (3DES, AES128, AES256, AES128GCM8, AES256GCM16, etc.)
- GREGRE tunnel, GRE tunnel over IPsec support
- PPTP, L2TPClient/Server support, L2TPv3, L2TP over IPsec support
- StunnelProxy for adding TLS encryption to clients and servers
- DMVPNScalable IPsec VPN support, Phase 2 and Phase 3, Dual Hub support
- SSTPSSTP client instance support
- ZeroTierZeroTier VPN client support
- WireGuardWireGuard VPN client and server support
- TincEncrypted tunneling with client and server support
- BACNETRouter mode with RS485, TCP support
- OPC UAClient and Server modes with TCP support
- MODBUSServer and Client modes, RTU and TCP support, custom register block requests
- DNP3TCP Master, DNP3 Outstation; RS232, RS485, TCP support
- DLMSClient mode for utility meter data exchange; TCP support
- COSEMScans COSEM objects for auto-detection and configuration
- APITeltonika Networks Web API (beta) support
- Monitoring & ManagementHTTP/HTTPS WebUI, FOTA updates, SSH (v1, v2), SMS commands, remote call management, TR-069, MQTT, SNMP, JSON-RPC, RMS support
- IoT PlatformsThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core integration
- CPUMediatek, 580 MHz, MIPS 24KEc
- RAM128 MB DDR2
- FLASH storage32 MB NOR Flash
- Firmware UpdateUpdate via WebUI, FOTA, RMS; configuration backup and restore
- Factory resetRestores all system settings, IP, PIN, and user data to default
- Operating systemRutOS (OpenWrt-based Linux OS)
- Supported languagesBusybox shell, Lua, C, C++
- Development toolsSDK package with build environment
- SerialRS232 (no flow control), RS485 (half-duplex 2-wire)
- SD CARDMicro SD (internal), up to 2 TB, FAT32/NTFS/ext2/ext3/ext4
- PoE In1 x PoE In, Active PoE 802.3af Class 0 (12.94 W)
- Power input9 - 57 VDC, reverse polarity & surge protection
- Physical Interfaces2 x RJ45 ports, 10/100 Mbps; 2 x SIM slots (Mini SIM – 2FF); 2 x SMA for Mobile, 1 x RP-SMA for Wi-Fi
- Dimensions83 x 25 x 83 mm
- Weight132 g
- MountingDIN rail, wall, flat surface (kit required)
- Operating temperature-40 °C to 75 °C
- Ingress ProtectionIP30
- CertificationsCE, UKCA, CB, RCM, EAC, UCRF
LTERUT206
16 other products in the same category:
Viewed products
