chevron_left
chevron_right
New
Access control system reader Ubiquiti UniFi UA-G3-Flex-W
- Type: Access control system reader
- Model: UA-G3-Flex-W
- Color: White
- Brand: UBIQUITI
- Connector: 1 x 10/100MbE RJ45
- Wireless technologies: BLE 4.1, NFC
- Power supply: PoE, 44-57V DC, 5W
- NFC frequency: 13.56 MHz
- Features: Keyboard, Apple Touch Pass support
- Protection rating: IP55
- Operating temperature: -30...60°C
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
- General
- Dimensions84 x 84 x 40.8 mm (3.3 x 3.3 x 1.6")
- Weight165 g (5.8 oz)
- Enclosure materialPolycarbonate, glass, aluminium alloy
- Mounting materialPolycarbonate, aluminum alloy
- MountingWall, gang box, junction box
- WeatherproofingIP55
- Networking interface(1) 10/100 MbE RJ45 port
- ConnectivityBLE 4.1, NFC
- Power methodPoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
- Supported voltage range44–57V DC
- Max. power consumption5W
- Sensor(12) Capacitive buttons
- Speaker(1) 8 ohm, 1W
- LEDsR/G/B/W
- Button(1) Factory-reset
- NFC frequency13.56 MHz
- NFC read range< 30 mm
- NFC technologyISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340), MIFARE Classic / MIFARE DESFIRE, Sony FeliCa™ (ID only), NFC Forum tags T1T, T2T, T3T, T4T, T5T, ECP 2.0
- Operating environmentOutdoor use
- Ambient operating temperature-30 to 60° C (-22 to 140° F)
- Ambient operating humidity5 to 90% noncondensing
- Software informationThe software version of a product can be checked at https://unifi.ui.com
- UL 294 levelDestructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
- UL 294 statementCompliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- PoE cabling requirementsCable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm²) for patch cords; 24 AWG (0.21 mm²) for horizontal or riser cable.
- CAN/ULC-60839-11-1 GradeGrade assignment: I
- CertificationsCE, FCC, IC, UL 294, CAN/ULC-60839-11-1
- Document number, and issue date and/or revision levelUA-G3-Flex V01
16 other products in the same category:
Viewed products
