chevron_left
chevron_right
8-port switch CUDY FS1010P
- Type: Switch
- Model: CUDY FS1010P
- Ports: 8 x 100 Mbps PoE
- Uplink Ports: 2 x 100 Mbps
- Switching Capacity: 2 Gbps
- MAC Address Table: 2K
- Extension Mode: >250 m @ 10 Mbps
- Modes: VLAN / Default / Extend
- PoE Standard: 802.3af/at
- Max PoE Power: 120 W
- Operating Temperature: 0°C to 40°C
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
- General
- Model VersionFS1010P 2.0
- 10/100 Mbps RJ45 Ports10
- 10/100 Mbps RJ45 PoE Ports#1~#8
- Max Power on a Single PoE Port30W
- PoE Port NotesComplies with IEEE 802.3at/af standards
- Extend Mode Ports#1~#8
- VLAN Mode Ports#1~#8
- LED IndicatorsPower, Link/ACT of Each Ethernet Port, DIP Mode (SW)
- Power InputAC Inlet
- Physical ButtonsVLAN/Default/Extend DIP Switch
- Copper Speed and DistanceCat. 3+: 100m @ 10 Mbps, Cat. 5+: 100m @ 100 Mbps, Cat. 5e+: 250m @ 10 Mbps (Extend Mode only)
- Copper Speed Note250-meter transmission only available in Extend Mode
- MAC Address Table2048
- Max Switching Capacity2 Gbps
- Max Forwarding Rate1.488 Mpps
- Packet Buffer2 Mbit
- Power MethodsAC
- AC Input Range100–240V~, 50/60Hz
- Power Supply120W
- Max Power Excluding PoE1W
- 802.3 Protocols802.3i 10BASE-T, 802.3u 100BASE-TX, 802.3x Flow Control, 802.3af PoE, 802.3at PoE
- Grounding MethodsThree-Prong Plug
- EMS ProtectionIEC/EN 61000-4-2 Level 2 ESD: Contact: 4kV; Air: 6kV, IEC/EN 61000-4-5 Level 4 Surge: Power: DM 2kV, CM 4kV; RJ45: CM 4kV
- Operating Temperature0~40 ℃ (32~104 ℉)
- Storage Temperature-40~70℃ (-40~158 ℉)
- Operating Humidity10~90% non-condensing
- Storage Humidity10~95% non-condensing
- Dimensions200×120×45 mm (7.87×4.72×1.77 inches)
- Product Weight610 g (21.52 oz.)
- Casing MaterialMetal
- Installation OptionsDesktop, Wall-mount
- Package ContentFS1010P, Power Cord, Installation Guide
SWITCHCUDYFS1010P
16 other products in the same category:
Viewed products
