Industrial Switch 8 port UTEPO UTP7208GE
- 2*1000Base-X SFP slots
- 8*10/100/1000Base-T Ethernet port
- 200 meters of transmission distance
- fanless and low power consumption design
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
Model | UTP7208GE |
Downlink Port | 8*10/100/1000Base-T Ethernet |
Uplink Port | 2*1000 Base-X SFP slots |
Alarm Output | One channel relay alarm output, 1A@DC 9V, 2 cores, 5.08mm terminal |
DIP Switch | 1.Enable / Disable fast ring, with self-healing time less than 20ms. |
2. Enable / Disable broadcast storm prevention. | |
Standard and Protocols | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3Z, IEEE802.3X, IEEE 802.1P |
Switching Capacity | 24Gbps |
Packet Forwarding Rate | 18Mpps |
Packet Buffer | 2Mbit |
MAC Address Table | 16K |
Jumbo Frame | 10K bytes |
LED Indicator | Port: 1*Link/Act (Green) & 1*Speed Rate(Orange) |
1*One-key Fast Ring (Green), 1*One-key BSP (Green), 2*PWR (Red) | |
Surge Immunity | 6KV per: IEC61000-4-5 |
ESD Immunity | 6KV contact discharge / 8KV air discharge |
Per: IEC61000-4-2 | |
Power Supply | External industrial DIN rail power supply |
Access Terminal | 4 PIN / 5.08mm |
Input Voltage | 12-48VDC |
Power Consumption | ≤12W（Full load） |
Operating Temperature | -40-75℃ |
Storage Temperature | -40-85℃ |
Operating Humidity | 5%-95%(Non-condensing) |
Shell | IP40, metal shell |
Dimension（L×W×H） | 159mm×110mm×46.5mm |
Installation | DIN rail or Wall mounted |
Weight | 749g |
Certification | CE, FCC |
