chevron_left
chevron_right
Industrial LTE router Teltonika RUT906 LTE(4G)
- 1 WAN, 4 LAN
- LTE(4G) - 150 Mbps, 3G - 42Mbps, 2G - 236.8 Kbps
- Wireless access point with Hotspot feature
- With automatic failover, WAN backup and other failover scenarios
- Multiple protocols supported including MQTT, Modbus TCP, DNP3
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
- General
- Mobile module4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
- 3GPP ReleaseRelease 10/11 depending on the hardware version
- SIM switch2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
- StatusIMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
- SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- USSDSupports sending and reading Unstructured Supplementary Service Data messages
- Black/White listOperator black/white list (by country or separate operators)
- Band managementBand lock, Used band status display
- SIM idle protection serviceWhen working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
- APNAuto APN
- BridgeDirect connection (bridge) between mobile ISP and device on LAN
- PassthroughRouter assigns its mobile WAN IP address to another device on LAN
- Wireless modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)
- Wi-Fi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
- SSID/ESSIDESSID stealth mode
- Wi-Fi usersUp to 100 simultaneous connections
- Wireless Connectivity FeaturesFast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
- Wireless MAC filterWhitelist, blacklist
- Wireless QR code generatorOnce scanned, a user will automatically enter your network without needing to input login information.
- HotspotCaptive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
- RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
- Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
- VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- FirewallPort forward, traffic rules, custom rules
- Firewall status pageView all your Firewall statistics, rules, and rule counters
- Ports managementView device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
- Network topologyVisual representation of your network, showing which devices are connected to which other devices
- HotspotCaptive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
- DHCPStatic and dynamic IP allocation, DHCP Relay
- QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNSSupported >25 service providers, others can be configured manually
- Network backupWi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
- Load balancingBalance Internet traffic over multiple WAN connections
- SSHFSPossibility to mount remote file system via SSH protocol
- Ethernet4 x RJ45 ports, 10/100 Mbps
- I/O’s2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector
- Status LEDs1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power
- SIM2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional)
- Power1 x 4-pin power connector
- Input/output1 x 10-pin industrial socket for inputs/outputs
- Antennas2 x SMA for LTE, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
- USB1 x USB A port for external devices
- RS2321 x DB9 socket
- RS4851 x 6-pin industrial socket
- ResetReboot/User default reset/Factory reset button
LTERUT906
16 other products in the same category:
