| The length of the detection zone, in the middle of the section, at the maximum length | 10 ... 300 m |
| Height of the detection zone, in the middle of the section, at maximum length | up to 1.8 m |
| The width of the detection zone, in the middle of the section, at the maximum length | up to 2,1 m |
| Speed of offenders movement | 0.1 m/s to 8 m/s |
| Number of frequency channels | 8 |
| Power supply voltage | 9 ... 30 V |
| Current used: Tx (transmitter) | ≤ 190 mA (12VDC), up to 79 mA |
| Current used: Rx (receiver) | ≤ 190 mA (12VDC), up to 111 mA |
| Switched voltage | up to 30 V |
| Switched current | up to 0.1 A |
| Resistance of the alarm relay contacts | up to 100 Om |
| Length of blind spot | 2 ... 4 m |
| Standby time after power on | up to 30 s |
| Standby time after power off | up to 1 s |
| Tamper button voltage | up to 30 V |
| The current used by the tamper button | up to 0.1 A |
| Security class | IP55 |
| Interfaces | USB, Bluetooth, RS-485 |
| Dimensions | 165x97x65 mm |
