MUST EP3000 PLUS 2kW, 12V, pure sine wave inverter with integrated AC charger, from 35A to 70A.
Features:
EP3000 PLUS Low Frequency Power Inverter/Charger is economical pure sine wave inverter, with AC charger from 20A to 60A; Solar/AC priority is configurable, when setting solar priority, solar will charge batteries as first priority, and AC can also charge batteries when solar charger current is too lower . With pure copper transformer, it enables inverter to operate with all kinds of home appliances.


Specifications

Nominal battery system voltage	12V DC
Inverter Output
Rated power	2000W
Surge power	6000VA
Capable of starting electric motor	1HP
Waveform	pure sine wave
Nominal output voltage RMS	220V / 230V / 240V AC ±10%
Output frequency	50Hz/60Hz ±0.3Hz
Inverter efficiency (Peak)	>88%
Line mode efficiency	>95%
Power factor	1.0
Typical transfer time	10ms (max)
Input AC
Voltage	230V AC
Selectable voltage range	96~132V AC 155~280V AC (for personal computers)
Frequency range	50Hz/60Hz (Auto sensing) 40~80Hz
Battery
Minimum start voltage	(10V/10.5V/11V) +0.5V
Low battery alarm	(10V/10.5V/11V) +0.5V
Low battery cut off	10V/10.5V/11V
High voltage alarm	(13.8-14.5V) +1V
High battery voltage recover	(13.8-14.5V) +0.5V
Idle consumption - Search mode	Load ?100±20W (220V)
Charger
Output voltage	Depends on battery type
Charge AC input breaker rating	2-3K/30A
Overcharge protection	15.7V DC
Maximum charge current	60A
Bypass protection
Input voltage waveform	Sine wave (grid or generator)
Nominal input frequency	50Hz or 60Hz
Overload protection	Circuit breaker
Output short circuit protection	Circuit breaker
Bypass breaker rating	1-3K/30A
Max bypass current	30A
Other specifications
Dimensions(W*H*D)	423*247*197 mm
Package dimensions(W*H*D)	585*387*322 mm
Net weight	21.1 kg
Gross weight	24.1 kg
Operating temperature	0°C to 40 °C
Storage temperature	-15°C to 60 °C
Audible noise	60dB max
Display	LED+LCD