Remote control set GSN ACS-102 2-ch
- The wireless dual-channel alarm system sets are multi purpose units, consisting of a receiver and hand-held panic button transmitters. It can be used in the following applications:
- Emergency warning by means of a panic button
- Arming/disarming of the alarm systems
- Remote controlling of electric gates, sliding doors,
electric curtains, automatic berriers, electromagnetic locks, turn ON/OFF lights, ets.
|
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
Advantages of ACS-102
- TWO INDEPENDENT CHANNEL
- FOUR OPERATING MODES OF EACH RECEIVER CHANNEL:
- Switching mode (ON/OFF)
- Hold mode (continous)
- Pulse mode - 1second
The receiver is capable of memorizing up to 680 codes and thus able to operate with 680 remote controls.The alarm comes on when the electric power supply is disconnected (PANIC BUTTON MODE).
Easy receiver programming by additional remote controls.
SMT technology.
Remote controls
Hand-held push-button transmitters are produced in dual-channel and four-channel standards.
Eachremote control has its own identity code to transmit a radio frequency signal to a remote
receiver. The ACS-101 receiver is capable of memorizing up to 680 different codes and therefore
are able to operate with 680 remote controls, which have different identity codes.
Operating range
The operating range of the remote controls depends on the mounting location of the receivers.
The various obstructions, the environmental factors, the radio frequency and electromagnetic
sources might influence the emission of a radio signal and as a result, might shorten the control
range.To reach the precise radio-signal: mount the receiver at least 1.5 meter above the ground,
as far as possible from any radio frequency and electromagnetic sources.
The receiving range in open space is up to 200-250m.
SPECIFICATIONS
| Power input | 12-16VDC |
| Current consumption: Stand-by mode | 46mA/12V |
| Active mode | 27mA/12V |
| Receiving range in open space | up to 250m |
| Operating frequency | 433.92MHz |
| Memory capacity | 680 codes |
| Alarm period in panic button mode | 3sec |
| Warm up period | 0.5sec |
| Dry contact relay | DC30V/1.0A; DC60V/0.3A; AC125V/0.5A |
| Opening protection in panic button mode | TAMPER SWITCH |
| Last event memory in panic button mode | 30 min |
| Operating temperature range | -20ºC +50ºC |
| Storage temperature range | -40ºC +80ºC |
| Dimensions | 85mm x 40mm x 20mm |
| Weight | 93gr. |
