Ethernet communicator Trikdis E14
- Communicator E14 is intended to upgrade compatible intruder alarm panels for event signalling via wired Internet (Ethernet)
- Direct connection to supported panels for quick installation and event reporting
- Simultaneous event reporting to Protegus Mobile/Web application, allowing user to remotely monitor and control his alarm system
- Integration with any monitoring software with Trikdis receivers supporting Surgard SG-MLR2 protocol
- Can send events to universal DC-09 receivers
- In case of lost connection with the main IP address, switches automatically to backup IP address
- Communication in secure encrypted protocol
|
DPD Pick up terminal. Delivery within 1-8 days. ( from 3,00 €) |
|
Delivery via DPD courier service. Delivery within 1-8 days. ( from 4,00 €) |
Power supply voltage | 10-16 V DC |
Current consumption | 120 mA (stand-by) Up to 250 mA (transmitting) |
Ethernet connection | IEEE802.3, 10 Base-T, RJ45 socket |
Data pack content | Contact ID format codes |
Memory | Up to 100 messages |
Inputs | 2, NC/NO/EOL-2,2 kΩ type |
Output | 1 OC type, commutating voltage up to 30 V and current up to 500 mA |
Operating environment | From -10 °C to 50 °C, with relative air humidity 80% when +20 °C |
Dimensions | 88 x 62 x 26 mm |
Data Bus Compatible with | |
PARADOX | Spectra series: SP5500, SP6000, SP7000, 1727, 1728, 1738 Magellan series: MG5000, MG5050, DIGIPLEX: EVO48, EVO192, EVO96, NE96 Esprit series:: E55, 728ULT, 738ULT |
DSC | Power Series: PC1616, PC1832, PC1864 PC585, PC1565, PC5020 |
PYRONIX | Matrix Series: MATRIX 424, MATRIX 832, MATRIX 832+, MATRIX 6, MATRIX 816 |
UTC Interlogix | NetworX (Caddx) NX-4, NX-6, NX-8 |
SECOLINK | PAS832 |
10 other products in the same category: